| Specification item |
1E (Standard) |
| Screw diameter (mm) |
A
16 |
B
19 |
| Injection capacity (cm3) |
10 |
16 |
| Plasticization capacity [PS] (kg/h) |
8 |
13 |
| Max. injection pressure (MPa [kgf/cm2]) |
255
[2600] |
196
[2000] |
| Injection rate (cm3/s) |
Standard |
101 |
142 |
| High velocity |
| High load |
70 |
99 |
| Injection velocity (mm/s) |
Standard |
500 |
| High velocity |
| High load |
350 |
| Screw velocity (rpm) |
0 ~ 400 |
| Hopper capacity [Optional] (L) |
15 |
| Clamping force(kN [tf]) |
147 [15] |
| Clamping stroke (mm) |
160 |
| Mold thickness [min. - max.] (mm) |
130 ~ 260 |
| Max. daylight opening (mm) |
420 |
| Tie bar clearance [H x V] (mm) |
260 x 260 |
| Die plate dimensions [H x V] (mm) |
370 x 370 |
| Min. mold dimensions [H x V] (mm) |
180 x 180 |
| Locating ring diameter (mm) |
60 |
| Ejector stroke (mm) |
50 |
| Heater band capacity (kW) |
2.95 |
3.16 |
| Machine dimensions [L x W x H] (m) |
2.50 x 0.86 x 1.46 |
| Floor dimensions [L x W] (m) |
2.25 x 0.66 |
| Machine weight (t) |
1.7 |
