|
Ube ST 3150
Clamping Unit
UBEMAX ST-3150
Clamping force US Ton
3150
Tie Bar Space (H X V) inch
84.00 X 74.00
Platen Size (H x V) inch
125.00 X 100.00
Standard inch
35.43 - 64.96
Die Height T-Slot Casting inch
30.31 - 59.84
T-Slot Plate inch
Clamping Stroke inch
66.93
Standard inch
102.36 - 131.89
Daylight T-Slot Casting inch
97.24 - 126.77
T-Slot Plate inch
Ejection Force US Ton
65.1
Ejector Stroke inch
13.78
Injection Unit
Standard
Screw Diameter inch
5.20 5.51 5.51 5.91 5.91 6.30
Theoretical Injection Capacity cu. in.
661.38 743.91 789.04 905.84 970.53 1104.2
Injection Weight (GPPS) Lb.
21.98 24.72 26.22 30.11 32.26 36.70
oz.
351.68 395.59 419.58 481.69 516.08 587.20
Injection Pressure PSI
24,550 21,780 25,050 21,820 24,860 21,850
Injection Rate cu. in/sec.
52.11 63.04 66.88 75.24 72.31 76.16
Screw Speed rpm.
132 105 107
Plasticating Capacity PS Lb./hr.
1,325 1,280 1,480 1,545 1,765 1,655
ABS Lb./hr.
1,105 1,215 1,390 1,435 1,655 1,545
General
Motor HP
75 X 3 = 225 75 X 2 +100 = 250
Heater Capacity kW
71 75 80 85 92 100
Quantity of Oil US gal
630 690
Quantity of Cooling Water US gal/min.
53 below 90 F 63 below 90 F
Nozzle Center Height inch
88.58
Dimensions (L x W x H) inch
685 X 185 X 156 709 X 185 X 156 728 X 185 X 156
Weight Lb.
407,900 418,900 429,900
Note:
1. Nozzle center height excludes grout.
2. Machine height excludes optional items, such as saftey hook.
3. Quantity of initial hydraulic oil is more than tank capacity as is includes for pipes.
4. Mark . shows the standard injection unit for each model.
5. Injection weight, injection rate and plasticating
capacity depend on resin, molding conditions, etc
6. Values may be changed without notice.
|
