|
Ube ST 2800
Clamping Unit
UBEMAX ST-2800
Clamping force US Ton
2800
Tie Bar Space (H X V) inch
74.80 X 66.93
Platen Size (H x V) inch
110.24 X 96.46
Standard inch
35.43 - 74.80
Die Height T-Slot Casting inch
35.43 - 74.80
T-Slot Plate inch
Clamping Stroke inch
70.87
Standard inch
106.30 - 145.67
Daylight T-Slot Casting inch
106.30 - 145.67
T-Slot Plate inch
Ejection Force US Ton
65.1
Ejector Stroke inch
13.78
Injection Unit
Standard
Screw Diameter inch
5.20 5.51 5.51 5.91 5.91 6.3
Theoretical Injection Capacity cu. in.
661.38 743.91 789.04 905.84 970.53 1104.2
Injection Weight (GPPS) Lb.
21.98 24.72 26.22 30.11 32.26 36.7
oz.
351.68 395.59 419.58 481.69 516.08 587.2
Injection Pressure PSI
24,550 21,780 25,050 21,820 24,860 21,850
Injection Rate cu. in/sec.
52.11 63.04 66.88 75.24 72.31 76.16
Screw Speed rpm.
132 105 107
Plasticating Capacity PS Lb./hr.
1,325 1,280 1,480 1,545 1,765 1,655
ABS Lb./hr.
1,105 1,215 1,390 1,435 1,655 1,545
General
Motor HP
75 X 3 = 225 75 X 2 + 100 = 250
Heater Capacity kW
71 75 80 85 92 100
Quantity of Oil US gal
630 690
Quantity of Cooling Water US gal/min.
53 below 90 F 63 below 90 F
Nozzle Center Height inch
78.74
Dimensions (L x W x H) inch
685 X 154 X 144 709 X 154 X 144 728 X 154 X 144
Weight Lb.
352,700 363,800 374,800
Note:
1. Nozzle center height excludes grout.
2. Machine height excludes optional items, such as saftey hook.
3. Quantity of initial hydraulic oil is more than tank capacity as is includes for pipes.
4. Mark . shows the standard injection unit for each model.
5. Injection weight, injection rate and plasticating
capacity depend on resin, molding conditions, etc
6. Values may be changed without notice.
|
