|
Tecnomagnete Quad Press Magnetic Platens
up to 4400tons
Quad-Press - A quick mould change
|
| 1)Insert the mould into the press. |
|
| 2)Place the mold on fixed side of the machine, taking as reference the centering ring. |
|
| 3)Close the press. |
|
| 4)Magnetization procedure for both fixed an moving side modules. |
|
| 5)Remove the brackets: the machine is ready to work. |
| |
A magnetically clamped mold is subject to neither deformations nor to inner tensions.
The force is distributed uniformly throughout the contact area, instead of only being applied on the external edges of the base-plate, as it happens when traditional clamping methods are used.
The quality of the molded part is constant in time.
First in Force
Each 80HC square pole generates a constant, predictable and concentrated force of 1000 kg.
This force improves the performances to an unbeatable level, giving a greater available force in a smaller contact area.
Flexibility and convenience
Lead time is strongly reduced; now the SMED production is a reality.
Moulds of any size, even bigger than the machine plates are easily clamped with no modification.
Quad-Press is maintenance free, due to it doesn't present any mechanical component inside.
Safety
A wide range of features for the control of the current, the magnetic flux, the positioning and the presence of the mould guarantee the maximum operational built-in safety.
The new IPC system is available on request with the touch-screen device.
IPC follows step-by-step the machine operator during mold change procedure and give in real-time the actual clamping force generated on the mold.
|
