Join our mailing list!
You are here: Home > YUSHIN > RA Full Servo Robots > RA 30

 
 
Yushin RB 30
 
 
Yushin RB 30 Full Servo Robot
 
 
This model is well suited to extraction of micro molding and precise molded parts such as gears and connectors.The robot is equipped with a flexible yet user-friendly E-touch Web controller and includes Lead Through Teaching software and networked operation.
 
Sealed cable carriers reduces dust contamination from moving cables and wires.
   
For networked operation.
  The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and Y-MAPII are required to establish systems for controlling and monitoring actual production.)
   
Latest controller.
 
The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.
 
 

Yushin RB 30 Specs

 

Model
RB-30S
RB-30D
A
 Oeprator-side model 1580(1880)[2280]
Rear-side take-out model
1570(1870)[2270]
B
 900(1200)[1600]
C
873[1023]
D
648[798]
E
400[550]
F
320[470]
280[430]
G
-
280[430]
H
80
 120
I
 - 90
Values in ( ) are for the L type.
Values in [ ] are for the LL type.
Values in << >> are for the rear-side take-out type.

Power source AC200V (50/60Hz)
Driving method Digital servo motor (3 / 5 axis)
Control method Micro computer controller
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

 
Model RB-30S RB-30D
Maximum Power Consumption Single phase AC200V 10.3A (D type is 12.5A)
Traverse Stroke
(mm)		 Standard 900
L (1200)
LL <1600>
Vertical Stroke
(mm)		 Main Arm 450
Sub Arm - 550
Kick Stroke
(mm)		 Main Arm 320<470> 280<430>
Sub Arm - 280<430>
Air consumption
liter(Normal) / cycle 		3
Maximum payload (kg) Less than 2kg*
*It is possible to increase the maximum weight capacity depending on the speed acceleration and deceleration data.
( )Type L. < >Type LL