Ube UU 2000
Clamping Unit
UBEMAX UU-2000
Clamping force US Ton
2200
Opening force US Ton
135
Tie Bar Space (H X V) inch
70.87X63.00
Platen Size (H x V) inch
93.30X85.43
Standard inch
31.50 - 59.06
Die Height T-Slot Casting inch
T-Slot Plate inch
Clamping Stroke inch
94.49 - 66.93
Standard inch
125.98
Daylight T-Slot Casting inch
T-Slot Plate inch
Ejection Force US Ton
51.81
Ejector Stroke inch
11.81
Injection Unit
Standard
Screw Diameter inch
4.72 5.20 5.20 5.51 5.51 5.91
Theoretical Injection Capacity cu. in.
496.9 601.3 661.4 743.9 789.0 905.8
Injection Weight (GPPS) Lb.
18.8 22.5 25.0 27.5 29.4 33.8
oz.
300 360 400 440 470 540
Injection Pressure PSI
2 4,237 2 0,026 2 4,493 2 1,776 2 5,047 2 1,819
Injection Rate cu. in/sec.
67.12 81.34 66.51 74.81 65.05 74.69
Screw Speed rpm.
123 113 103
Plasticating Capacity PS Lb./hr.
1323 1279 1477 1543 1653 1609
ABS Lb./hr.
1100 1210 1386 1430 1474 1540
General
Motor HP
75 X 3 = 225
Heater Capacity kW
56 60 71.3 75 81.4 85
Quantity of Oil US gal
793
Quantity of Cooling Water US gal/min.
71.3 below 90 F
Nozzle Center Height inch
82.09
Dimensions (L x W x H) inch
535 X 157 X 144 555 X 157 X 144 575 X 157 X 144
Weight Lb.
###### ###### ######
Note:
1. Nozzle center height excludes grout.
2. Machine height excludes optional items, such as saftey hook.
3. Quantity of initial hydraulic oil is more than tank capacity as is includes for pipes.
4. Mark . shows the standard injection unit for each model.
5. Injection weight, injection rate and plasticating
capacity depend on resin, molding conditions, etc
6. Values may be changed without notice.
