|
UBEMAX UU Series 2 Platen Machines
The UU Series is a compact, two-platen machine that delivers new flexibility in plant layouts within new or existing facilities.
DIRECT TYPE CLAMPING UNIT
UBE offers its high performance UU Series. This series utilizes state-of-the art compact design to provide a more flexible plant layout. Other advantages include shorter compression time and higher efficiency and durability.
DIRECT LOCK CLAMP STRUCTURE AND DIE OPEN/CLOSE PROCESS
FEATURES OF THE DIRECT LOCK CLAMP UNIT
-
Independent hydraulic cylinders are used for mold open/close and compression, reducing compression time and energy consumption.
-
The compression cylinder features a short stroke ram cylinder to achieve quick compression.
-
The moving platen is supported throughout its full stroke by the tie rods and guide shoes to provide smooth and precise motion. A three-platen design, along with an oversized, slide-base type guide shoe, provide long-term reliability and durability.
-
The mold open/close cylinders are located diagonally to maintain stable mold movement.
-
Die height and clamping force can be set automatically at the touch of a button. Further energy savings are possible by slightly reducing clamp force during cooling.
FLOOR SPACE SAVINGS OF APPROXIMATELY 20%
HUMMA-S CONTROLLER
Operation of the new "HUMMA-S" controller is simplified throughout the use of a touch panel screen EL display.
DISPLAY OF INJECTION MOLDING PROCESS
To enhance the control's effectiveness, the injection profile is displayed on the screen to easily set the most suitable injection sequence.
ALL OPERATION DATA ARE IN-PUT DIGITALLY AND STORED INTERNALLY (TOUCH PANEL)
FULL DIAGNOSTIC FUNCTION
MONITORING MOLDING CONDITIONS
MOLD CONDITION MEMORY (20 Molds)
STANDARD BARREL HEAT CALENDAR TIMER
HIGH PRECISION INJECTION UNIT
To accommodate a diverse range of high precision products, the UBEMAX UU Series is equipped with a standard, high-pressure injection unit. Thin wall, highly viscous products, as well as large, thick-walled products are ideal for the UU series. PPC control, optional closed-loop hold control, injection, and speed profile monitors all contribute to high quality, highly repeatable molded products.
FLEXIBLE INJECTION CONTROL
Can be programmed to control injection speeds (5 steps) and hold pressures (3 steps).
STANDARD PACK PRESSURE CONTROL (PPC) TIMER, OR POSITION CAN BE SELECTED FOR V P TRANSFER
AUTOMATIC COLOR CHANGE OPERATION MINIMIZES TIME LOSS
EASY TO READ ON-SCREEN INJECTION PRESSURE AND SPEED PROFILE
To maximize the efficiency of the PPC, an injection profile is displayed on screen. This can be used to easily set molding parameters.
HIGH PERFORMANCE SCREW
Our general purpose wear- and corrosion-resistant standard screw has been designed using our vast experience as a manufacturer of both machinery and material. Special purpose screws and barrels are also available.
BARREL TEMPERATURE CONTROL
Controllable to five zones for the nozzle, two for the barrel. Plastic temperature is stabilized the barrel. All heaters are PID controlled.
STANDARD LOT COUNTER STOPS OPERATION AT A USER-SPECIFIED PRODUCT QUANTITY
SOFTWARE SERVO INJECTION CONTROL (PATENT PENDING) (OPTIONAL) (UBE INJECTION MOLDING FMS)
FMS controls the operation of several machines through the use of a centralized schedule controller. Injection conditions, material feeding, process management, etc., can be changed automatically according to a predetermined production schedule. Ideal for small-lot production with a large variety of parts, materials, and unattended operation.
QUICK MOLD CHANGE (SHUTTLE TYPE)
CUSTOM DESIGNED AND BUILT TO MEET ANY FACTORY LAYOUT
AUTOMATIC HOT RUNNER COUPLER FOR MOLD PRE-HEAT
AUTOMATIC COUPLER FOR MOLD UTILITIES ON THE PRE-HEAT STATION
DIE CLAMPERS
AUTOMATIC HOT RUNNER COUPLER FOR OPERATION
AUTOMATIC COUPLER FOR OPERATIONS MOLD UTILITIES
AUTOMATIC PURGE DISCARD SYSTEM
UBEMAX UU Series
The UU Series is a compact, two-platen machine that delivers new flexibility in plant layouts within new or existing facilities.
DIRECT TYPE CLAMPING UNIT
UBE offers its high performance UU Series. This series utilizes state-of-the art compact design to provide a more flexible plant layout. Other advantages include shorter compression time and higher efficiency and durability.
DIRECT LOCK CLAMP STRUCTURE AND DIE OPEN/CLOSE PROCESS
FEATURES OF THE DIRECT LOCK CLAMP UNIT
-
Independent hydraulic cylinders are used for mold open/close and compression, reducing compression time and energy consumption.
-
The compression cylinder features a short stroke ram cylinder to achieve quick compression.
-
The moving platen is supported throughout its full stroke by the tie rods and guide shoes to provide smooth and precise motion. A three-platen design, along with an oversized, slide-base type guide shoe, provide long-term reliability and durability.
-
The mold open/close cylinders are located diagonally to maintain stable mold movement.
-
Die height and clamping force can be set automatically at the touch of a button. Further energy savings are possible by slightly reducing clamp force during cooling.
FLOOR SPACE SAVINGS OF APPROXIMATELY 20%
HUMMA-S CONTROLLER
Operation of the new "HUMMA-S" controller is simplified throughout the use of a touch panel screen EL display.
DISPLAY OF INJECTION MOLDING PROCESS
To enhance the control's effectiveness, the injection profile is displayed on the screen to easily set the most suitable injection sequence.
ALL OPERATION DATA ARE IN-PUT DIGITALLY AND STORED INTERNALLY (TOUCH PANEL)
FULL DIAGNOSTIC FUNCTION
MONITORING MOLDING CONDITIONS
MOLD CONDITION MEMORY (20 Molds)
STANDARD BARREL HEAT CALENDAR TIMER
HIGH PRECISION INJECTION UNIT
To accommodate a diverse range of high precision products, the UBEMAX UU Series is equipped with a standard, high-pressure injection unit. Thin wall, highly viscous products, as well as large, thick-walled products are ideal for the UU series. PPC control, optional closed-loop hold control, injection, and speed profile monitors all contribute to high quality, highly repeatable molded products.
FLEXIBLE INJECTION CONTROL
Can be programmed to control injection speeds (5 steps) and hold pressures (3 steps).
STANDARD PACK PRESSURE CONTROL (PPC) TIMER, OR POSITION CAN BE SELECTED FOR V P TRANSFER
AUTOMATIC COLOR CHANGE OPERATION MINIMIZES TIME LOSS
EASY TO READ ON-SCREEN INJECTION PRESSURE AND SPEED PROFILE
To maximize the efficiency of the PPC, an injection profile is displayed on screen. This can be used to easily set molding parameters.
HIGH PERFORMANCE SCREW
Our general purpose wear- and corrosion-resistant standard screw has been designed using our vast experience as a manufacturer of both machinery and material. Special purpose screws and barrels are also available.
BARREL TEMPERATURE CONTROL
Controllable to five zones for the nozzle, two for the barrel. Plastic temperature is stabilized the barrel. All heaters are PID controlled.
STANDARD LOT COUNTER STOPS OPERATION AT A USER-SPECIFIED PRODUCT QUANTITY
SOFTWARE SERVO INJECTION CONTROL (PATENT PENDING) (OPTIONAL) (UBE INJECTION MOLDING FMS)
FMS controls the operation of several machines through the use of a centralized schedule controller. Injection conditions, material feeding, process management, etc., can be changed automatically according to a predetermined production schedule. Ideal for small-lot production with a large variety of parts, materials, and unattended operation.
QUICK MOLD CHANGE (SHUTTLE TYPE)
CUSTOM DESIGNED AND BUILT TO MEET ANY FACTORY LAYOUT
AUTOMATIC HOT RUNNER COUPLER FOR MOLD PRE-HEAT
AUTOMATIC COUPLER FOR MOLD UTILITIES ON THE PRE-HEAT STATION
DIE CLAMPERS
AUTOMATIC HOT RUNNER COUPLER FOR OPERATION
AUTOMATIC COUPLER FOR OPERATIONS MOLD UTILITIES
AUTOMATIC PURGE DISCARD SYSTEM
|
