|
Nissei TNX Vertical Hybrid Machines
TNX Series is a turntable type ideal for many types of insert moldings. TNX Series offers five basic types by clamping force, ranging from 532kN (50ton) to 2156kN (220ton). For injection, center-injection type (vertical injection from top of the mold) gTNX-R-Vh or parting-injection type (horizontal injection from side of the mold) gTNX-R-Ah can be chosen, offering optimal selections from 19 different configurations (parting injection types are made to order).
The key feature of gTNX Seriesh is its innovative super energy-efficient hybrid pump system gX-Pump,h which demonstrates superb injection performance while saving on the running cost.
For 50 ton TNX50R, it consumes 70% less power and 25% less hydraulic oil than those of conventional hydraulic machine.
|
|
|
MODEL |
TNX50R |
|
Specification Item |
Unit |
|
5V |
|
|
|
|
|
0.87 (22) |
1.02 (26) |
1.18 (30) |
|
|
|
|
|
2.1 (1.2) (35) |
3.0 (1.6) (49) |
4.0 (2.2) (65) |
|
|
|
|
|
30.9 (14) |
44.1 (20) |
66.1 (30) |
|
|
|
|
|
37120
(256) (2610) |
26590
(183) (1870) |
19980
(138) (1405) |
|
|
|
|
|
7.0 (114) |
9.7 (159) |
12.9 (212) |
|
|
|
|
|
11.8 (300) |
|
|
|
|
|
0~300 |
|
|
|
|
|
2.0 (1.8) |
|
|
|
|
|
59 (53) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
6.7 (170) |
|
|
|
|
|
16.5 (420) |
|
|
|
|
|
21.7x15.7 (550x400) |
|
|
|
|
|
9.3x9.3 (235x235) |
|
|
|
|
|
14.3x14.3 (364x364) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
40.6 (1030) |
|
|
|
|
|
551x2 (250x2)
(2 mold halves) |
|
|
|
|
|
11 |
|
|
|
|
|
3.77 |
4.22 |
|
|
|
|
|
40 (150) |
|
|
|
|
|
105.7x62.8x115.7
(2.68x1.59x2.94) |
105.7x62.8x117.7
(2.68x1.59x2.99) |
|
|
|
|
|
100.4x48.8 (2.55x1.24) |
|
|
|
|
|
8378 (3.8) | |
|
9V |
|
|
|
|
|
1.10 (28) |
1.26 (32) |
1.42 (36) |
|
|
|
|
|
4.2 (2.3) (69) |
5.5 (3.0) (90) |
7.0 (3.8) (114) |
|
|
|
|
|
39.7 (18) |
59.5 (27) |
79.4 (36) |
|
|
|
|
|
35410
(244) (2490) |
27020
(187) (1900) |
21330
(147) (1500) |
|
|
|
|
|
7.5 (123) |
9.8 (161) |
12.4 (203) |
|
|
|
|
|
7.9 (200) |
|
|
|
|
|
0~200 |
|
|
|
|
|
2.7 (2.4) |
|
|
|
|
|
59 (53) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
6.7 (170) |
|
|
|
|
|
16.5 (420) |
|
|
|
|
|
21.7x15.7 (550x400) |
|
|
|
|
|
9.3x9.3 (235x235) |
|
|
|
|
|
14.3x14.3 (364x364) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
40.6 (1030) |
|
|
|
|
|
551x2 (250x2)
(2 mold halves) |
|
|
|
|
|
15 |
|
|
|
|
|
6.23 |
|
|
|
|
|
40 (150) |
|
|
|
|
|
105.7x62.8x133.5
(2.68x1.59x3.39) |
|
|
|
|
|
100.4x48.8 (2.55x1.24) |
|
|
|
|
|
8818 (4.0) | |
|
Injection |
Screw diameter |
Inch (mm) |
|
Injection capacity |
in3 (oz) (cm3) |
|
Plasticizing capacity [PS] |
lbs/h (kg/h) |
|
Injection pressure |
psi
(MPa) (kg/cm2) |
|
Injection rate |
in3/s (cm3/s) |
|
Injection velocity |
in/s (mm/s) |
|
Screw rotation speed |
rpm |
|
Nozzle touch force |
US ton (tf) |
|
Clamping |
Clamping force |
US ton (tf) |
|
Clamping stroke |
inch (mm) |
|
Min. mold thickness |
inch (mm) |
|
Max. daylight opening |
inch (mm) |
|
Die plate dim.[HxV] |
inch (mm) |
|
Min. mold dim. [HxV] |
inch (mm) |
|
Max. mold dim. [HxV] |
inch (mm) |
|
Ejector stroke |
inch (mm) |
|
Ejector force |
US ton (tf) |
|
Turntable diameter |
inch (mm) |
|
Max. mold weight
(bottom mold) |
lbs (kg) |
|
Others |
Pump motor |
kW |
|
Heater band capacity |
kW |
|
Hydraulic oil qty |
Gal (L) |
|
Machine dimensions
[LxWxH] |
inch (m) |
|
Floor dimensions [LxW] |
inch (m) |
|
Machine weight |
lbs (t) | |
|
All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
Nissei is not responsible for any inaccuracies contained herein.
Please consult our sales representative or Nissei regional offices before designing the mold.
Actual placticizing capacity may vary, depending on the molding conditions and material used.
For parting injection type (TNX-R-A), contact us for details. |
| |
|
|
|
|
|
|
|
|
MODEL |
TNX75R |
|
Specification Item |
Unit |
|
9V |
|
|
|
|
|
1.10 (28) |
1.26 (32) |
1.42 (36) |
|
|
|
|
|
4.2 (2.3) (69) |
5.5 (3.0) (90) |
7.0 (3.8) (114) |
|
|
|
|
|
39.7 (18) |
59.5 (27) |
79.4 (36) |
|
|
|
|
|
35410
(244) (2490) |
27020
(187) (1900) |
21330
(147) (1500) |
|
|
|
|
|
7.5 (123) |
9.8 (161) |
12.4 (203) |
|
|
|
|
|
7.9 (200) |
|
|
|
|
|
0~200 |
|
|
|
|
|
2.7 (2.4) |
|
|
|
|
|
85 (77) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
7.9 (200) |
|
|
|
|
|
17.7 (450) |
|
|
|
|
|
23.6x18.1 (600x460) |
|
|
|
|
|
11.0x11.0 (280x280) |
|
|
|
|
|
16.7x16.7 (423x423) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
47.6 (1210) |
|
|
|
|
|
551x2 (250x2)
(2 mold halves) |
|
|
|
|
|
15 |
|
|
|
|
|
6.23 |
|
|
|
|
|
50 (170) |
|
|
|
|
|
109.6x66.7x135.2
(2.78x1.69x3.43) |
|
|
|
|
|
104.3x52.8 (2.65x1.34) |
|
|
|
|
|
9700 (4.4) | |
|
12V |
|
|
|
|
|
1.26 (32) |
1.42 (36) |
1.57 (40) |
|
|
|
|
|
6.1 (3.4) (100) |
7.7 (4.3) (127) |
9.6 (5.3) (157) |
|
|
|
|
|
50.7 (23) |
70.5 (32) |
97.0 (44) |
|
|
|
|
|
32850
(226) (2310) |
25950
(179) (1825) |
21050
(145) (1480) |
|
|
|
|
|
7.9 (129) |
9.9 (163) |
12.3 (201) |
|
|
|
|
|
6.3 (160) |
|
|
|
|
|
0~170 |
|
|
|
|
|
2.7 (2.4) |
|
|
|
|
|
85 (77) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
7.9 (200) |
|
|
|
|
|
17.7 (450) |
|
|
|
|
|
23.6x18.1 (600x460) |
|
|
|
|
|
11.0x11.0 (280x280) |
|
|
|
|
|
16.7x16.7 (423x423) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
47.6 (1210) |
|
|
|
|
|
551x2 (250x2)
(2 mold halves) |
|
|
|
|
|
15 |
|
|
|
|
|
7.43 |
|
|
|
|
|
50 (170) |
|
|
|
|
|
109.6x66.7x141.1
(2.78x1.69x3.58) |
|
|
|
|
|
104.3x52.8 (2.65x1.34) |
|
|
|
|
|
9921 (4.5) | |
|
Injection |
Screw diameter |
Inch (mm) |
|
Injection capacity |
in3 (oz) (cm3) |
|
Plasticizing capacity [PS] |
lbs/h (kg/h) |
|
Injection pressure |
psi
(MPa) (kg/cm2) |
|
Injection rate |
in3/s (cm3/s) |
|
Injection velocity |
in/s (mm/s) |
|
Screw rotation speed |
rpm |
|
Nozzle touch force |
US ton (tf) |
|
Clamping |
Clamping force |
US ton (tf) |
|
Clamping stroke |
inch (mm) |
|
Min. mold thickness |
inch (mm) |
|
Max. daylight opening |
inch (mm) |
|
Die plate dim.[HxV] |
inch (mm) |
|
Min. mold dim. [HxV] |
inch (mm) |
|
Max. mold dim. [HxV] |
inch (mm) |
|
Ejector stroke |
inch (mm) |
|
Ejector force |
US ton (tf) |
|
Turntable diameter |
inch (mm) |
|
Max. mold weight
(bottom mold) |
lbs (kg) |
|
Others |
Pump motor |
kW |
|
Heater band capacity |
kW |
|
Hydraulic oil qty |
Gal (L) |
|
Machine dimensions
[LxWxH] |
inch (m) |
|
Floor dimensions [LxW] |
inch (m) |
|
Machine weight |
lbs (t) | |
|
All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
Nissei is not responsible for any inaccuracies contained herein.
Please consult our sales representative or Nissei regional offices before designing the mold.
Actual placticizing capacity may vary, depending on the molding conditions and material used.
For parting injection type (TNX-R-A), contact us for details. |
| |
|
|
|
|
|
|
|
|
MODEL |
TNX100R |
|
Specification Item |
Unit |
|
12V |
|
|
|
|
|
1.26 (32) |
1.42 (36) |
1.57 (40) |
|
|
|
|
|
6.1 (3.4) (100) |
7.7 (4.3) (127) |
9.6 (5.3) (157) |
|
|
|
|
|
50.7 (23) |
70.5 (32) |
97.0 (44) |
|
|
|
|
|
32850
(226) (2310) |
25950
(179) (1825) |
21050
(145) (1480) |
|
|
|
|
|
7.9 (129) |
9.9 (163) |
12.3 (201) |
|
|
|
|
|
6.3 (160) |
|
|
|
|
|
0~170 |
|
|
|
|
|
2.7 (2.4) |
|
|
|
|
|
115 (105) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
11.8 (300) |
|
|
|
|
|
21.7 (550) |
|
|
|
|
|
27.6x20.1 (700x510) |
|
|
|
|
|
12.0x12.0 (305x305) |
|
|
|
|
|
18.3x18.3 (465x465) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
52.0 (1320) |
|
|
|
|
|
882x2 (400x2)
(2 mold halves) |
|
|
|
|
|
15 |
|
|
|
|
|
7.43 |
|
|
|
|
|
53 (200) |
|
|
|
|
|
115.6x70.3x147.2
(2.93x1.79x3.74) |
|
|
|
|
|
110.2x56.3 (2.80x1.43) |
|
|
|
|
|
12125 (5.5) | |
|
18V |
|
|
|
|
|
1.42 (36) |
1.57 (40) |
1.77 (45) |
|
|
|
|
|
9.0 (4.9) (147) |
11.1 (6.1) (182) |
14.1 (7.7) (231) |
|
|
|
|
|
94.8 (43) |
130 (59) |
176 (80) |
|
|
|
|
|
32280
(222) (2270) |
26170
(180) (1840) |
20690
(142) (1455) |
|
|
|
|
|
9.9 (163) |
12.3 (201) |
15.5 (254) |
|
|
|
|
|
6.3 (160) |
|
|
|
|
|
0~240 |
|
|
|
|
|
3.1 (2.8) |
|
|
|
|
|
115 (105) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
11.8 (300) |
|
|
|
|
|
21.7 (550) |
|
|
|
|
|
27.6x20.1 (700x510) |
|
|
|
|
|
12.0x12.0 (305x305) |
|
|
|
|
|
18.3x18.3 (465x465) |
|
|
|
|
|
2.0 (50) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
52.0 (1320) |
|
|
|
|
|
882x2 (400x2)
(2 mold halves) |
|
|
|
|
|
15 |
|
|
|
|
|
8.78 |
|
|
|
|
|
53 (200) |
|
|
|
|
|
115.6x70.3x156.7
(2.93x1.79x3.98) |
|
|
|
|
|
110.2x56.3 (2.80x1.43) |
|
|
|
|
|
12787 (5.8) | |
|
Injection |
Screw diameter |
Inch (mm) |
|
Injection capacity |
in3 (oz) (cm3) |
|
Plasticizing capacity [PS] |
lbs/h (kg/h) |
|
Injection pressure |
psi
(MPa) (kg/cm2) |
|
Injection rate |
in3/s (cm3/s) |
|
Injection velocity |
in/s (mm/s) |
|
Screw rotation speed |
rpm |
|
Nozzle touch force |
US ton (tf) |
|
Clamping |
Clamping force |
US ton (tf) |
|
Clamping stroke |
inch (mm) |
|
Min. mold thickness |
inch (mm) |
|
Max. daylight opening |
inch (mm) |
|
Die plate dim.[HxV] |
inch (mm) |
|
Min. mold dim. [HxV] |
inch (mm) |
|
Max. mold dim. [HxV] |
inch (mm) |
|
Ejector stroke |
inch (mm) |
|
Ejector force |
US ton (tf) |
|
Turntable diameter |
inch (mm) |
|
Max. mold weight
(bottom mold) |
lbs (kg) |
|
Others |
Pump motor |
kW |
|
Heater band capacity |
kW |
|
Hydraulic oil qty |
Gal (L) |
|
Machine dimensions
[LxWxH] |
inch (m) |
|
Floor dimensions [LxW] |
inch (m) |
|
Machine weight |
lbs (t) | |
|
All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
Nissei is not responsible for any inaccuracies contained herein.
Please consult our sales representative or Nissei regional offices before designing the mold.
Actual placticizing capacity may vary, depending on the molding conditions and material used.
For parting injection type (TNX-R-A), contact us for details. |
| |
|
|
|
|
|
|
|
|
MODEL |
TNX150R |
|
Specification Item |
Unit |
|
18V |
|
|
|
|
|
1.42 (36) |
1.57 (40) |
1.77 (45) |
|
|
|
|
|
9.0 (4.9) (147) |
11.1 (6.1) (182) |
14.1 (7.7) (231) |
|
|
|
|
|
94.8 (43) |
130 (59) |
176 (80) |
|
|
|
|
|
32280
(222) (2270) |
26170
(180) (1840) |
20690
(142) (1455) |
|
|
|
|
|
9.9 (163) |
12.3 (201) |
15.5 (254) |
|
|
|
|
|
6.3 (160) |
|
|
|
|
|
0~240 |
|
|
|
|
|
3.1 (2.8) |
|
|
|
|
|
165 (150) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
13.8 (350) |
|
|
|
|
|
23.6 (600) |
|
|
|
|
|
30.7x23.6 (780x600) |
|
|
|
|
|
13.4x13.4 (340x340) |
|
|
|
|
|
19.2x19.2 (488x488) |
|
|
|
|
|
3.1 (80) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
59.1 (1500) |
|
|
|
|
|
992x2 (450x2)
(2 mold halves) |
|
|
|
|
|
20 |
|
|
|
|
|
8.78 |
|
|
|
|
|
63 (240) |
|
|
|
|
|
129.7x77.0x161.0
(3.29x1.95x4.09) |
|
|
|
|
|
125.6x63.0 (3.19x1.60) |
|
|
|
|
|
18739 (8.5) | |
|
25V |
|
|
|
|
|
1.57 (40) |
1.77 (45) |
1.97 (50) |
|
|
|
|
|
12.3 (6.7) (201) |
15.5 (8.5) (254) |
19.2 (10.5) (314) |
|
|
|
|
|
97.0 (44) |
132 (60) |
176 (80) |
|
|
|
|
|
34520
(238) (2430) |
27270
(188) (1920) |
22050
(152) (1550) |
|
|
|
|
|
8.4 (138) |
10.7 (175) |
13.2 (216) |
|
|
|
|
|
4.3 (110) |
|
|
|
|
|
0~170 |
|
|
|
|
|
3.4 (3.1) |
|
|
|
|
|
165 (150) |
|
|
|
|
|
9.8 (250) |
|
|
|
|
|
13.8 (350) |
|
|
|
|
|
23.6 (600) |
|
|
|
|
|
30.7x23.6 (780x600) |
|
|
|
|
|
13.4x13.4 (340x340) |
|
|
|
|
|
19.2x19.2 (488x488) |
|
|
|
|
|
3.1 (80) |
|
|
|
|
|
2.2 (2.0) |
|
|
|
|
|
59.1 (1500) |
|
|
|
|
|
992x2 (450x2)
(2 mold halves) |
|
|
|
|
|
20 |
|
|
|
|
|
11.3 |
|
|
|
|
|
63 (240) |
|
|
|
|
|
129.7x77.0x157.1
(3.29x1.95x3.99) |
|
|
|
|
|
125.6x63.0 (3.19x1.60) |
|
|
|
|
|
21605 (9.8) | |
|
Injection |
Screw diameter |
Inch (mm) |
|
Injection capacity |
in3 (oz) (cm3) |
|
Plasticizing capacity [PS] |
lbs/h (kg/h) |
|
Injection pressure |
psi
(MPa) (kg/cm2) |
|
Injection rate |
in3/s (cm3/s) |
|
Injection velocity |
in/s (mm/s) |
|
Screw rotation speed |
rpm |
|
Nozzle touch force |
US ton (tf) |
|
Clamping |
Clamping force |
US ton (tf) |
|
Clamping stroke |
inch (mm) |
|
Min. mold thickness |
inch (mm) |
|
Max. daylight opening |
inch (mm) |
|
Die plate dim.[HxV] |
inch (mm) |
|
Min. mold dim. [HxV] |
inch (mm) |
|
Max. mold dim. [HxV] |
inch (mm) |
|
Ejector stroke |
inch (mm) |
|
Ejector force |
US ton (tf) |
|
Turntable diameter |
inch (mm) |
|
Max. mold weight
(bottom mold) |
lbs (kg) |
|
Others |
Pump motor |
kW |
|
Heater band capacity |
kW |
|
Hydraulic oil qty |
Gal (L) |
|
Machine dimensions
[LxWxH] |
inch (m) |
|
Floor dimensions [LxW] |
inch (m) |
|
Machine weight |
lbs (t) | |
|
All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
Nissei is not responsible for any inaccuracies contained herein.
Please consult our sales representative or Nissei regional offices before designing the mold.
Actual placticizing capacity may vary, depending on the molding conditions and material used.
For parting injection type (TNX-R-A), contact us for details. |
| |
|
|
|
|
|
|
|
|
MODEL |
TNX220R |
|
Specification Item |
Unit |
|
25V |
|
|
|
|
|
1.57 (40) |
1.77 (45) |
1.97 (50) |
|
|
|
|
|
12.3 (6.7) (201) |
15.5 (8.5) (254) |
19.2 (10.5) (314) |
|
|
|
|
|
97.0 (44) |
132 (60) |
176 (80) |
|
|
|
|
|
34520
(238) (2430) |
27270
(188) (1920) |
22050
(152) (1550) |
|
|
|
|
|
8.4 (138) |
10.7 (175) |
13.2 (216) |
|
|
|
|
|
4.3 (110) |
|
|
|
|
|
0~170 |
|
|
|
|
|
3.4 (3.1) |
|
|
|
|
|
242 (220) |
|
|
|
|
|
14.6 (370) |
|
|
|
|
|
13.8 (350) |
|
|
|
|
|
28.3 (720) |
|
|
|
|
|
33.5x26.4 (850x670) |
|
|
|
|
|
15.4x15.4 (390x390) |
|
|
|
|
|
22.0x22.0 (559x559) |
|
|
|
|
|
3.1 (80) |
|
|
|
|
|
3.9 (3.6) |
|
|
|
|
|
63.0 (1600) |
|
|
|
|
|
1764x2 (800x2)
(2 mold halves) |
|
|
|
|
|
20 |
|
|
|
|
|
11.3 |
|
|
|
|
|
132 (500) |
|
|
|
|
|
141.5x84.8x175.2
(3.59x2.15x4.45) |
|
|
|
|
|
137.4x77.2 (3.49x1.96) |
|
|
|
|
|
24251 (11.0) | |
|
Injection |
Screw diameter |
Inch (mm) |
|
Injection capacity |
in3 (oz) (cm3) |
|
Plasticizing capacity [PS] |
lbs/h (kg/h) |
|
Injection pressure |
psi
(MPa) (kg/cm2) |
|
Injection rate |
in3/s (cm3/s) |
|
Injection velocity |
in/s (mm/s) |
|
Screw rotation speed |
rpm |
|
Nozzle touch force |
US ton (tf) |
|
Clamping |
Clamping force |
US ton (tf) |
|
Clamping stroke |
inch (mm) |
|
Min. mold thickness |
inch (mm) |
|
Max. daylight opening |
inch (mm) |
|
Die plate dim.[HxV] |
inch (mm) |
|
Min. mold dim. [HxV] |
inch (mm) |
|
Max. mold dim. [HxV] |
inch (mm) |
|
Ejector stroke |
inch (mm) |
|
Ejector force |
US ton (tf) |
|
Turntable diameter |
inch (mm) |
|
Max. mold weight
(bottom mold) |
lbs (kg) |
|
Others |
Pump motor |
kW |
|
Heater band capacity |
kW |
|
Hydraulic oil qty |
Gal (L) |
|
Machine dimensions
[LxWxH] |
inch (m) |
|
Floor dimensions [LxW] |
inch (m) |
|
Machine weight |
lbs (t) | |
|
|
All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
Nissei is not responsible for any inaccuracies contained herein.
Please consult our sales representative or Nissei regional offices before designing the mold.
Actual placticizing capacity may vary, depending on the molding conditions and material used.
For parting injection type (TNX-R-A), contact us for details. | |
|
|
|
|
|
