Join our mailing list!
You are here: Home > YUSHIN > HS High Speed Servo Robots > RA 3000HS
Yushin RA 3000HS
 
Yushin RA 3000 HS High Speed Robot
 
RA-3000S-HS
Take-out cycle time: 2.90seconds*
Full cycle time: 17.80seconds*
 
 
 
Super large-sized take-out robot applicable for the high-cycle moldings (Fist in this industry)
 
This super large-sized take-out robot's target clamping force is 1500`5000t. It is featuring high-speed operation, equipped with high-power motors on every axis, kick axis, traverse axis and vertical axis in spite of such a large size. The high-speed operation contributes to high production efficiency.
For networked operation
The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and YEMAPII are required to establish systems for controlling and monitoring actual production.)
Latest controller
The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.
 
 
Yushin RA 3000 HS Dimensions
Power source AC200V50/60Hz
Driving method Digital servo motor (3-axis)
Control method Micro computer control
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

 
Model RA-3000S-HS
Maximum Power Consumption Triple phase AC200V 17.3A
Traverse Stroke
mm		 Standard 4500

Kick Stroke
mm

 Standard 2100
Vertical Stroke
mm		 Standard 3000
Air consumption
Normal/cycle 		200
Maximum payload (kg) Less than 50Kg
The payload varies depending on the take-out robot speed setting.