Join our mailing list!
You are here: Home > YUSHIN > Side Entry Robots > SXA 300
Yushin SXA-300V
 
SXA 300 Side Entry Robot
 
Take-out cycle time*
0.64sec
SXA 300 Dimensions
 
Power voltage AC200V (50/60Hz)
Driving method Digital servo motor (3/5 axes)
Control method Micro computer
Air Pressure 0.49MPa
Maximum air pressure 0.79MPa

 
Model
SXA-300 III
SXA-300V
Maximum Power Consumption
3-phase AC200V 13.7A
Traverse Stroke
(mm)
Product side
1600
Runner side
-
1050
Kick Stroke
(mm)
Product side
675
 
Runner side
565
565
Vertical Stroke (mm)
325
Air consumption
liter(Normal) / cycle
20
Maximum payload (Including end-of-arm tool)
Less than 8 kg
*1 : The payload varies with the robot speed setting.
 
Side entry type for clean molding environment
  This robot contributes to extraction of molded products which requires clean molding environment such as optical parts, medical equipment and food containers,etc. Further more this side-entry robot is good for low-ceiling factories such as clean room, free from dust as no driving mechanism is located above mold.
 
Hi-power servo motors
  Special high-power servo motors are used to optimize acceleration, deceleration and overall speeds.
 
3/5-axis NC servo motor robot
  In addition to the servo motors on the traverse and kick axis, the robot incorporates servo motor on the vertical axis to accommodate down stream operations such as palletizing and for quick change over to new jobs. 3-axis SXA-300III for 2 plates and 5-axis SXA-300V for 3 plates are lined up.