Join our mailing list!
You are here: Home > MOKON > Blown Film Coolers
Blown Film Coolers
 
Mokon Blown Film Coolers
 

Mokon’s BFC Series Blown Film Air Coolers offer an increase in blown film productivity, especially in warmer climates or when ambient air temperatures rise during the summer. Mokon’s BFC Series boosts productivity by eliminating production variables in your air ring supply, including air temperature, pressure and volume.

The BFC Series uses a modulated chilled water supply to provide a constant leaving air temperature to the process. The air inlet diffuser assures that the air stream covers the full face of the cooling coil to provide optimum cooling efficiency. The leaving air chamber is insulated to reduce condensation while providing the coldest air possible to the air ring.
 
 
Model
Process Air CFM
B.t.u./Hr.of Heat Removal1
Nominal Cooling Required2 (tons)
Water Capacity (gpm)
Chilled Water Connection (in)
Air Inlet/Outlet Size (in)
BFC-600
600
64,512
7.3
13
1.00
10/10
BFC-1000
1000
105,855
12.1
26
1.50
10/10
BFC-1500
1500
158,861
18.2
40
2.00
14/14
BFC-2000
2000
211,775
24.2
59
2.00
14/14
BFC-3500
3500
370,470
42.4
81
2.50
16/16
BFC-5000
5000
532,210
60.5
112
2.50
18/18
BFC-7500
7500
793,760
89.3
126
3.00
22/22
Model Dimensions Base Unit (LxWxH) Base Unit Shipping Wt (lbs) Shipping Wt w/ 16" Blower Shipping Wt w/ 35" Blower Blower Motor3 16" Static Pressure (hp) Blower Motor3 35" Static Pressure (hp)
BFC-600 48x40x47 400 690 790 3 7.5
BFC-1000 48x42x47 430 705 830 5 10
BFC-1500 52x48x47 645 985 1215 7.5 15
BFC-2000 52x50x47 700 1050 1325 10 20
BFC-3500 74x58x60 1100 1580 2035 15 40
BFC-5000 84x81x70 1600 2375 2575 25 60
BFC-7500 84x83x70 1700 2575 3800 40 75

1Based on 50°F leaving air from cooler, 80°F wet bulb ambient air temp, 40°F entering chilled water and required CFM of process air.
Please note - Heat removal value does not include heat contributed by the blower.
2Chilled water tons required with entering air at 100°F dry bulb, 80°F wet bulb, 40°F chilled water and 50°F air leaving.
3Blower at 460 Volt, 3 Phase, 60 Hertz. (Additional voltages available; consult factory)
 

Blown Film Cooler Features

The Blown Film Air Cooler System offers many features as standard to provide accurate temperature control while cooling your blown film.

  1. Condensate trap
  2. Adjustable legs
  3. Hybrid epoxy, powder coated, heavy gauge steel cabinetry
  4. Zinc plated bolts spaced for 35" static pressure
  5. Leaving air thermometer
  6. Coil air vent
  7. Chilled water inlet thermometer
  8. Two-way leaving air temperature actuated valve (optional)
  9. Entering air diffuser
  10. Chilled water outlet thermometer and ball valve