Join our mailing list!
You are here: Home > USED MOLDING MACHINES > Used NISSEI Machines > NISSEI Over 450tons
Large Tonnage Late Model Nissei Machines 



 

 Nissei DC600 (2 Shot Machine)

 

2004 Nissei DC600 Two Shot Machine (Side by Side Injection Units) - Available Spring 2010 

 

USED YEAR 2004 NISSEI MODEL DC600-50-18A DOUBLE INJECTION MOULDING MACHINE WITH ROTARY PLATEN AND SPECIALLY DESIGNED FOR HEAVY DUTY MOLDS equipped with 9300T Controller

SPECIFICATIONS

CLAMP UNIT


Clamp force:                                                         600 U.S. Tons

Clamping stroke                                                    850 mm (33.47")

Min . mold thickness                                              350 mm (11.81")

Max. daylight opening                                            1200 mm ( 47.25")

Tie Bar clearance (HxV):                                       1515 mm x 565 mm (59.65" x 22.25")

Die plate dim.( HxV) stationary platen                    1830 mm x 1030 mm (72.05" x 40.56")

Ejector stroke:                                                       130 mm (5.12")

 

INJECTION UNITS          50A                                                        18A

Screw diameter                     63 mm (2.48")                                         36mm (1.42”)

Shot size:                               21.40 oz.                                                 4.96 oz

Injection Pressure                  18,130 PSI                                             32,279 PSI

Screw stroke                         205 mm (8.07”)                                       145 mm (5.71”)

Screw speed:                         0-150 RPM Constant Torque                  0-155 RPM    

150-210 RPM Variable Torque               155-240 RPM

ELECTRICAL UNIT

Pump motor:                                                         75 HP

Primary voltage /phase/cycle:                                 575/3/60

Heater voltage/phase/cycle:                                    230/3/60

Heater band capacity                                             24.84 KW

Control circuit:                                                       24 volt DC

NOTE:  Heater voltage requires separate 230 volt supply

GENERAL

Machine weight:                                                    25.0 U.S. Tons

Hydraulic oil:                                                         1700 litres


    * Specialized platens, machine frame, base and carriers, reinforced rotary mechanism all designed to support a maximum mold weight of 3.0 x 2 metric tons on the movable side

 

660ton Nissei PH660 (1995)

New Arrival!

Nissei PH660 (1995)


 1995 NISSEI 720 Injection Machine, Model PH660S280B, 102 oz Injection Shot Capacity, 37.8” x 37.8” Tie Bar Spacing, 55.1” x 55.1” Platen Size, 37.5” x 55.1” Maximum Mould Size, 17.7” Min. x 71.3” Max. Daylight, 35.4 Stroke, NC9000F Controller, 35,175 Hours, Core Pull, 575 V

 

 

TACT Controller             9300T Controller              9000F Controller


Nissei's Latest TACT Controller       Nissei's Full Color Touch Screen 9300T Controller       Nissei's 9000F Controller
Go to small tonnage used Nissei machines page
Go to mid tonnage used Nissei machines page


Used Equipment may have had modifications made to them that En-Plas Inc. is unaware of and take no responsibility for.
Specifications listed on our used equipment pages may differ from actual specifications on the equipment and are meant solely as a guideline.