(416) 286-3030 blemieux@en-plasinc.com

Maintenance Control Systems

Mokon Fluid Maintenance systems

← Back to Mokon

Clearflo

Mokon Clear Flo

ClearFlo

The ClearFlo Heat Transfer Fluid Filtration System continuously filters heat transfer fluids without disrupting system operation, significantly reducing downtime and maintenance costs to your heat transfer system. Fluid contamination increases your system’s energy consumption, reduces its efficiency and causes internal components to break down prematurely. Mokon’s ClearFlo system significantly reduces this contamination, improving the efficiency and life of your heat transfer system. Typical Results

  • Reduces downtime and maintenance labor
  • Improves efficiency of your heat transfer system
  • Reduces wear and damage to rotating parts
  • Can triple the life of your heat pumps
  • Reduces frequency of fluid changes
  • Removes particles as small as 10 microns

If you consider downtime, maintenance labor and part replacement costs, the ClearFlo System should provide a full return on investment within six months to one year of installation. Typical Results

  • Reduces downtime and maintenance labor
  • Improves efficiency of your heat transfer system
  • Reduces wear and damage to rotating parts
  • Can triple the life of your heat pumps
  • Reduces frequency of fluid changes
  • Removes particles as small as 10 microns

If you consider downtime, maintenance labor and part replacement costs, the ClearFlo System should provide a full return on investment within six months to one year of installation.

Clearflo Plus

Mokon Clear Flo Plus

ClearFlo Plus

The ClearFlo PLUS Heat Transfer Fluid Filtration and Water Removal System easily connects to your heat transfer fluid system’s cool oil reservoir to remove contaminants, water, and in some cases, reduces the acidity of the fluid for longer fluid life and trouble-free system operation. Fluid contamination, and especially the presence of water in the fluid, increases your system’s energy consumption, and is a source of nuisance shutdowns. Mokon’s ClearFlo PLUS system significantly reduces fluid contamination and water build-up in your heat transfer system, reducing downtime and maintenance costs. Typical Results

  • Reduces downtime and maintenance labor
  • Reduces モnuisanceヤ shutdowns caused by water vapor pockets
  • Improves efficiency of your heat transfer system
  • Reduces wear and damage to rotating parts
  • Extends the life of pumps up to three times longer
  • Reduces frequency of fluid changes
  • Removes particles as small as 1/10 microns

If you consider downtime, maintenance labor and part replacement costs, the ClearFlo System should provide a full return on investment within six months to one year of installation.

Leakmaster

Mokon Leakmaster (Logic Seal Unit)

Leak-Master Bulletin

Mokon’s Leak-Master negative pressure system stops leaks in molds and processes without stopping production. This easily-connected, portable unit controls water leaks and flow by means of a progressive cavity pump. The system “pulls” rather than “pushes” the water through the process. Essentially, the system creates a vacuum to effectively stop the leak, so there is no need to shut down production for a mechanical repair.

Applications
The Leak-Master can be connected to any process circulating water system. It can be used in conjunction with a direct water supply, a temperature control system, or as a booster pump to an existing water system where head losses cause processing problems.

Series Pump
(hp)
Flow Rates
(GPM)
Process
Drain/Supply
Connections
Dimensions
L x W x H *
Shipping
Weight
(lbs)
NP1000 1/2 9 1″ 28″ x 16″ x 25″ 110
NP2000 1/2 9 1″ 28″ x 16″ x 25″ 110
NP4000 1/2 9 1″ 28″ x 16″ x 25″ 110
NP1100 1 24 1-1/2″ 32″ x 17″ x 27″ 170
NP2100 1 24 1-1/2″ 32″ x 17″ x 27″ 170
NP4100 1 24 1-1/2″ 32″ x 17″ x 27″ 170

Temperature range for all series is 10°F to 180°F
*Height does not include regulator valve adjustment – allow for 4″

D-Scaler System

Mokon D Scaler System

D-Scaler Bulletin

If hard water or mineral deposits are decreasing the efficiency of your process heating and/or cooling, then you need a Mokon D-Scaler. This system is proven to remove rust, scale, and/or lime deposits from your process, as well as Mokon systems, or any other circulating temperature control system. This unit will increase the efficiency of your process while prolonging the life of your equipment.

Series Pump
(hp)
Operating
Temperature
Motor
(hp)
Voltage
(1 phase, 60hz)
Dimensions
L x W x H
(inches)
Shipping
Weight
Tank Capacity
Small 25 GPM @ 15 PSI ambient 1/2 115 25.5″ x 18″ x 35″ 60 lbs. 15 gallons
Large 25 GPM @ 32 PSI ambient 3/4 115 27.5″ x 21″ x 35″ 100 lbs. 15 gallons

D-Scaler Fluid

Mokon’s D-Scaler Fluid is a non-toxic, non-flammable liquid that quickly dissolves any deposit buildup. This non-corrosive fluid will not harm your equipment or the environment. It is available in 5 and 55 gallon containers. Both the fluid and hoses are sold separately from Mokon’s D-Scaler unit.

Questions and Quote Requests

You can find Quote Request Forms on our Contact Page
Contact Us