(416) 286-3030 blemieux@en-plasinc.com

Iceman Full Range System

For some applications, the combination of heating and cooling is required to reach optimal performance. Mokon’s Full Range Temperature Control System does just that! We integrate a Mokon circulating water temperature control system with an Iceman chiller to offer a combination heating/chilling system all in one package!

This unique system allows for single or multiple zone process temperature control. It is ideal for heating/chilling applications or multi-zone processes, where the water supply isn’t cold enough for processing, or in cases where drainage of hot water is undesirable or not feasible. All these features in a compact design with Mokon reliability!

← Back to Portable Chilling Systems

Iceman Full Range System

Full Range

Mokon’s water based Full Range temperature control system offers a combination heating and chilling system all in one package. A Mokon water system, combined with an Iceman chiller, integrates the benefits and features of both products into one compact, self-supporting unit. The Full Range system is available with heating capacities up to 96 kW and up to 40 Ton chilling capacities with a temperature range of -10°F to 300°F (-23°C to 149°C).

The Full Range system is ideal for the following applications:

  • Jacketed vessels and reactors
  • Laboratory, sanitary and chemical processes
  • Multi-zone processes
  • Processes requiring both heating and chilling and/or a wide variety of temperatures
  • Where water supplies are not accessible

Full Range systems are available in multiple sizes, configurations, and a variety of cooling, heating and pumping capacities, along with many options and accessories. In addition, Mokon can supply custom higher temperature systems up to 600°F (315°C). Please contact Mokon for more information.

System
Specifications
Cooling
Capacity
(Tons)
Compressor
Horsepower
(HP)
# of
Heating
Units*
Tank Size
(Gallons)
Approx. Dimensions
L x W x H**
Shipping
Weight
(approx. lbs.)***
Air Cooled 2 2 Up to 2 15 50″ x 28″ x 39″ 600
Air Cooled 3 3 Up to 2 15 50″ x 28″ x 39″ 630
Air Cooled 5 5 Up to 2 20 58″ x 37″ x 45″ 700
Air Cooled 7.5 7.5 Up to 2 20 58″ x 37″ x 45″ 1275
Air Cooled 10 10 Up to 2 20 58″ x 37″ x 45″ 1485
Air Cooled 15 15 Up to 3 65 80″ x 40″ x 65″ 1650
Air Cooled 20 20 Up to 3 65 80″x 40″ x 65″ 1850
Air Cooled 30 30 Up to 3 65 140″ x 50″ x 80″ 3860
Air Cooled 35 35 Up to 3 65 140″ x 50″ x 80″ 4200
Water Cooled 2 2 Up to 2 15 50″ x 28″ x 39″ 500
Water Cooled 3 3 Up to 2 15 50″ x 28″ x 39″ 550
Water Cooled 5 5 Up to 2 20 58″ x 37″ x 45″ 610
Water Cooled 7.5 7.5 Up to 2 20 58″ x 37″ x 45″ 1200
Water Cooled 10 10 Up to 2 20 58″ x 37″ x 45″ 1465
Water Cooled 15 15 Up to 3 65 80″ x 40″ x 65″ 1575
Water Cooled 20 20 Up to 3 65 80″ x 40″ x 65″ 1850
Water Cooled 30 30 Up to 3 65 140″ x 50″ x 50″ 3760
Water Cooled 35 35 Up to 3 65 140″ x 50″ x 50″ 4100

*Available in a variety of heating and pumping capacities.
***Weight of Chiller only. (Weight of heating units to be added.)
Temperature range is 20 degrees F to 250 degrees F for standard systems.
**Cabinet size may change depending on kw capacity of heating units.

Iceman Full Range Internal View

A Mokon circulating water temperature control system combined with an Iceman chiller, integrates the benefits and features of both products into one compact, self-supporting unit.

Standard Features
A. Stainless steel centrifugal supply pump
B. Heavy-duty insulated steel tank
C. Insulated non-ferrous plumbing and components
D. Air-cooled condenser (shown) or Water-cooled condenser (not shown)
E. Hermetically sealed compressors (small models) Semi-hermetically sealed compressors (larger models)
F. Highly efficient brazed plate evaporator
G. Microprocessor based controller mounted in operator-friendly orientation
H. Hot gas bypass (cylinder unloading for 15 & 20 ton standard)
I. NEMA rated electrical enclosure with disconnect switch
J. Heater canister with stainless steel diverter

Eurotherm Controller
Eurotherm 3216 Series
The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.

There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller.

Custom Controls
Mokon’s ability to meet customersメ specific requirements is seen not only in custom system designs, but also in controls. Our engineers can custom design a control package that meets your specific processing needs, from brand name controls, to direct computer/host machine interfacing. All of which can be expected with the same quality and durability that our customers expect from our complete line of temperature control systems.

Questions and Quote Requests

You can find Quote Request Forms on our Contact Page
Contact Us