(416) 286-3030 blemieux@en-plasinc.com

Duratherm HTP High Temperature Thermalators

Designed for the most restrictive of processes or those requiring higher fluid temperature or pressure. The HTP system adds a cast iron pump to the original design, resulting in the highest temperature and pressure capabilities available.

← Back to Thermalators

Duratherm HTP
Mokon’s Duratherm HTP circulating water temperature control system maximizes performance with temperatures up to 300°F (149°C) and pressures up to 70 PSI. The Duratherm design features an advanced heating canister and stainless steel diverter, which create a forced flow path for higher heat transfer rates.

Designed for the most restrictive of processes or those requiring higher fluid temperature or pressure, the HTP system adds a cast iron pump to the Duratherm design, resulting in the highest temperature and pressure capabilities available.

All Duratherm systems meet NFPA 79 (National Fire Protection Association) electrical safety standards and come standard with a UL 508A labeled electrical sub-panel. All of these features and more, combined with our extended warranty, make the Duratherm an easy choice for delivering precise and accurate temperature control.

Model Pump Flow Rates Heating
Capacity
(kw)
Process
Connection
Drain/Supply
Connection
Dimensions Shipping
Weight
DB 1 1/2 hp 25 GPM/
60 PSI
9/18* 1″ 1″ 28″ x 16″ x 25″ 150 lbs.
DB 1 1/2 hp 25 GPM/
60 PSI
24* 1″ 1″ 32″ x 17″ x 27″ 150 lbs.
DB 1 1/2 hp 25 GPM/
60 PSI
36/48 1″ 1″ 33″ x 17″ x 52″ 275 lbs.
DB 1 1/2 hp 25 GPM/
60 PSI
72 1″ 1″ 33″ x 17″ x 52″ 300 lbs.
DB 1 1/2 hp 25 GPM/
60 PSI
96 1″ 1″ 37″ x 25″ x 39″ 325 lbs.
DC 2 hp 40 GPM/
60 PSI
9/18/24* 1 1/2″ 1″ 32″ x 17″ x 27″ 160 lbs.
DC 2 hp 40 GPM/
60 PSI
36/48 1 1/2″ 1″ 33″ x 17″ x 52″ 285 lbs.
DC 2 hp 40 GPM/
60 PSI
72 1 1/2″ 1″ 33″ x 17″ x 52″ 310 lbs.
DC 2 hp 40 GPM/
60 PSI
96 1 1/2″ 1″ 37″ x 25″ x 39″ 335 lbs.
DF 3 hp 60 GPM/
60 PSI
9/18/24* 1 1/2″ 1″ 32″ x 17″ x 27″ 170 lbs.
DF 3 hp 60 GPM/
60 PSI
36/48 1 1/2″ 1″ 33″ x 17″ x 52″ 295 lbs.
DF 3 hp 60 GPM/
60 PSI
72 1 1/2″ 1″ 33″ x 17″ x 52″ 320 lbs.
DF 3 hp 60 GPM/
60 PSI
96 1 1/2″ 1″ 37″ x 25″ x 39″ 345 lbs.
DE 5 hp 80 GPM/
70 PSI
9/18/24* 1 1/2″ 1″ 32″ x 17″ x 27″ 185 lbs.
DE 5 hp 80 GPM/
70 PSI
36/48 1 1/2″ 1″ 33″ x 17″ x 52″ 310 lbs.
DE 5 hp 80 GPM/
70 PSI
72 1 1/2″ 1″ 33″ x 17″ x 52″ 335 lbs.
DE 5 hp 80 GPM/
70 PSI
96 1 1/2″ 1″ 37″ x 25″ x 39″ 360 lbs.
DD 7 1/2 hp 100 GPM/
70 PSI
9/18/24* 2″ 1″ 32″ x 17″ x 27″ 250 lbs.
DD 7 1/2 hp 100 GPM/
70 PSI
36/48 2″ 1″ 33″ x 17″ x 52″ 375 lbs.
DD 7 1/2 hp 100 GPM/
70 PSI
72 2″ 1″ 33″ x 17″ x 52″ 400 lbs.
DD 7 1/2 hp 100 GPM/
70 PSI
96 2″ 1″ 37″ x 25″ x 39″ 425 lbs.
DA 10 hp 120 GPM/
70 PSI
9/18/24* 2″ 1″ 38″ x 17″ x 28″ 300 lbs.
DA 10 hp 120 GPM/
70 PSI
36/48 2″ 1″ 39″ x 17″ x 52″ 425 lbs.
DA 10 hp 120 GPM/
70 PSI
72 2″ 1″ 39″ x 17″ x 52″ 450 lbs.
DA 10 hp 120 GPM/
70 PSI
96 2″ 1″ 37″ x 25″ x 39″ 475 lbs.

*Available in dual zone configurations.

Duratherm HTP is built with non-corrosive piping for long life and durability, with fewer pipe connections to ensure leak-free operation. Mokon offers a wide range of controls, from solid state analog dial type, to microprocessor-based and custom designed control packages. Mokon can provide the precise control that your process requires.

Duratherm HTP Internal View

Standard Features

A. Horizontal brass heater canister with copper heating element and stainless steel flow diverter
B. Control panel mounted in operator-friendly orientation
C. Standard safety features: Pressure relief valve and high temperature switch
D. Thermocouple sensing probe, single or dual available
E. Non-corrosive copper piping
F. Cast brass fluid connections securely mounted to cabinet
G. Removable panel for easy access to heating element
H. Standard safety feature: Low pressure switch
I. Cast iron pump for temperatures up to 300°F

Eurotherm Controller
Eurotherm 3216 Series

The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.

There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller.

Questions and Quote Requests

You can find Quote Request Forms on our Contact Page
Contact Us