FVX 600-1440tons Specifications

FVX Series (600T – 1440T) (specifications found at the bottom of this page)

FVX Series is inheriting the outstanding hydraulic machine traditions of easy operability and direct pressure clamping advantages, but yet it achieves significant amount of energy-savings. This is a sensational debut of the new large hybrid injection molding machine series. FVX Series, which is equipped with the NISSEI original hybrid pump system “X-Pump,” offers outstanding total balance with its high-rigidity clamping system, excellent injection performance, long lasting & easy maintainability, and electric machine level of energy savings. It revolutionizes the concept of hydraulic injection molding systems.

Fusion of advantages in hydraulic machines (direct-pressure clamping, low-maintenance, long life, and low cost) and electric machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise)

Epochal hybrid pump system “X Pump”

Energy saving

Almost equivalent to that of electric molding machines (A maximum of 55% reduction as compared with conventional hydraulic machines)
Quick response injection

Stability in low-velocity/low-pressure & wide range
Injection velocity: From ultra-low (1 mm/s) to high velocity range

Linearity
Excellent linearity in both injection velocity and injection pressure

Excellent injection holding pressure performance
Capability in sustaining high injection holding pressure longer (as compared with electric types)

Reduction in the amount of hydraulic oil
A maximum of 56% reduction as compared with conventional machines

Long-life & low-maintenance system
Merits of direct pressure mold clamping

• Excellent low-pressure clamping performance
• Constant transmission of specified clamping force
• Clamping force not affected by ambient temperature

Easy operation/easy handling

FVX 560

fvx560

Model		FVX560
Item	Unit	210L		310L
Injection Capacity	OZ. cm3/shot	70.7 2110	89.5 2670	107 3180	132 3930
Injection Pressure	PSI kgf/cm2	27020 1900	21330 1500	26590 1870	21550 1515
Clamping Force	US Tons Tons	618 561		618 561
Tiebar Clearance	Inch mm	38.2 x 38.2 970 x 970		38.2 x 38.2 970 x 970
Clamping Stroke	Inch mm	35.4 900		35.4 900
Min Mold Thickness	Inch mm	15.7 400		15.7 400
Max Dayight Opening	Inch mm	71.3 1810		71.3 1810

FVX 660

fvx660

Model		FVX660
Item	Unit	310L		400L
Injection Capacity	OZ. cm3/shot	107 3180	132 3930	134 4000	168 5020
Injection Pressure	PSI kgf/cm2	26590 1870	21550 1515	24320 1710	19410 1365
Clamping Force	US Tons Tons	720 653		720 653
Tiebar Clearance	Inch mm	43.3 x 43.3 1100 x 1100		43.3 x 43.3 1100 x 1100
Clamping Stroke	Inch mm	37.4 950		37.4 950
Min Mold Thickness	Inch mm	17.7 450		17.7 450
Max Dayight Opening	Inch mm	75.2 1910		75.2 1910

FVX 860

fvx860

Model		FVX860
Item	Unit	400L		600L
Injection Capacity	OZ. cm3/shot	134 4000	168 5020	201 6010	251 7480
Injection Pressure	PSI kgf/cm2	24320 1710	19410 1365	24890 1750	19980 1405
Clamping Force	US Tons Tons	946 858		946 858
Tiebar Clearance	Inch mm	52.4 x 52.4 1330 x 1330		52.4 x 52.4 1330 x 1330
Clamping Stroke	Inch mm	46.3 1175		46.3 1175
Min Mold Thickness	Inch mm	19.7 500		19.7 500
Max Dayight Opening	Inch mm	89.0 2260		89.0 2260

FVX1100

Model		FVX1100
Item	Unit	600L
Injection Capacity	OZ. cm3/shot	201 6010	281 7480
Injection Pressure	PSI kgf/cm2	24890 1750	19980 1405
Clamping Force	US Tons Tons	1207 1095
Tiebar Clearance	Inch mm	55.1 x 55.1 1400 x 1400
Clamping Stroke	Inch mm	49.2 1250
Min Mold Thickness	Inch mm	23.6 600
Max Dayight Opening	Inch mm	94.9 2410

FVX1300

Model		FVX1300
Item	Unit	700L		1100L
Injection Capacity	OZ. cm3/shot	235 7010	297 8870	294 8774	369 11006	423 12635
Injection Pressure	PSI kgf/cm2	24390 1715	19270 1355	29170 2051	23220 1633	20320 1429
Clamping Force	US Tons Tons	1440 1307		1440 1307
Tiebar Clearance	Inch mm	57.1 x 57.1 1450 x 1450		57.1 x 57.1 1450 x 1450
Clamping Stroke	Inch mm	51.2 1300		51.2 1300
Min Mold Thickness	Inch mm	27.6 700		27.6 700
Max Dayight Opening	Inch mm	100.8 2560		100.8 2560