Used Nissei ES6000 300ton All Electric Machine (2002) with 9300T controller – tested and in good running condition
ONLY NISSEI MODEL ES6000/280-71E “ELJECT” ELECTRIC MOULDING MACHINE
Clamp force: 308 U.S. Tons
Distance Between Tie Bars (HxV): 25.7″ x 25.7″
Platen size (HxV): 37.2″ x 37.2″
Maximum clamp stroke: 23.4″
Mould thickness (min.-max.): 12.48″ – 23.4″
Maximum daylight: 46.8″
Ejector stroke: 5.1″
Shot size: 29.8 oz. G.P.P.S. (C)
Injection Pressure: 17920 P.S.I.
Screw diameter: 2.8″
Screw speed: 0-220 RPM
Voltage including heaters and motor/phase/cycle: 230/3/60
Machine weight: 14.8 U.S. Tons
*Specifications are subject to change without notice.
TOP OF THE LINE CONTROLLER – NC9300T FOR NISSEI ALL ELECTRIC MACHINES
Electronic controller with 6 speeds/3 holding
pressure and 3 limit pressure profiling, shot discrimination
and colour screen and graphics, and 1 floppy disk,
High resolution colour 10.4″ touch flat screen.
30 mold storage in machine with removable disk drive to store up to 100 mold set-ups with 1 floppy disk.
Input/output analog displayed with explicit error messages.
RS232 port for printer.
PID Control for barrel and oil with auto tuning on nozzle.
Servo Control of injection, screw rotate, clamp and ejectors.
Protection from electrical noise.
Real time graphics for injection functions.
6 step injection speed profiling.
6 step injection pressure profiling (3) fill, (3) hold.
Digital back pressure.
2 speeds for plasticizing.
3 mold opening and closing speeds plus 2 stage high pressure clamp.(with CPN sequence)
Multi-stage ejector control
Set value graphics for profiles for injection.
Interlock for part detection (not including sensor).
Core pull control software.
Graphic and alpha-numeric printing capability.
Injection boost to hold switch over by velocity, position, pressure velocity or cavity sensor (individually or in combination).
Air blow software control.
Real time clock.
Cycle time monitoring and analysis.
Interface for standard plant monitoring systems.
History reporting of machine cycle conditions and set-up changes.
Quick machine set-up via a single page.
Forced reject count.
Clamp retry up to 2 times.
Digital display of screw position, ejection and clamp with bar display of current position.
Standard graph display for injection profile.
Monitor tolerance window can be assigned for reject outputs.
Out of 17 processing variables, 8 can be recorded an 4 can be selected and displayed.
Graphic printouts can be generated.Average and standard deviations are calculated.Printer not included.
Standby temperature program so when machine goes into alarm temperature drops to standby
(selectable for on/off).
Emergency temperature off for lights out operation selectable on/off.
Total run time.
Grand total shot display.
Calendar function to turn barrel heat on automatically with option to add dryer, mold temp controller and spare.
Unique machine identification through the controller. Alpha numeric characters.
Decompress before and after metering.
Ejector backward stop by position through front screen
Mould ejector plate backward confirmation input software included (hardware extra)
QUOTED ELECTRIC NISSEI MACHINE EQUIPPED WITH THE FOLLOWING
- Tool kit for set up and maintenance
- Spare parts package
- Centralized auto grease system
- Centralized manual lube
- Mounting pads
- Hopper magnet
- Mould clamps
- Air blow off circuit
- Machine painted Nissei green unless stated otherwise
- Mould Open & Ejector during Screw Rotation
- High Pressure Clamping and Injection start same timing
- Clamp Pressure decompression during metering
Please reach out to Enplas for more details if interested. firstname.lastname@example.org