(416) 286-3030 blemieux@en-plasinc.com

Nissei Past Model Reference

Nissei Machines in this area are to be used for reference purposes only. The machines in this category are no longer offered by Nissei and are meant as guides for existing owners or customers who have purchased these machines used.

← Back to Nissei Injection Molding Machines

En-Plas does not take any responsibility for the information provided, and it is strongly suggested that customers speak directly to En-Plas regarding any questions they may have.

Nissei FN Series

Nissei FN Hydraulic Series Specifications Nissei's FN Series is no longer available and has been replaced by the new FNX Series machine...this page is only for reference purposes.   More Info

Nissei Vertical Electric/Hybrid Machines

Nissei All Electric & Hybrid Vertical Machines  Performance Specifications: TNS-RE-VE Series [Center injection/Turntable type] All Electric and Hybrid Models Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Mold thickness (mm) TNS30RE2VE 16 13 294 [30] 200 150 - 250 19 18 TNS30RE5VE 22 35 26 49 TNS50RE5VE 22 35 490 [50] 200 170 - 270 26 49 TNS50RE9VE 28 69 32 90 TNS75RE9VE 28 69 735 [75] 250 200 - 300 32 90 TNS75RE12VE 32 101 36 127 TNS100RE9VE * 28 69 1026 [105] 250 300 Min. 32 90 TNS100RE12VE * 32 101 36 127 TNS150RE12VE * 32 101 1469 [150] 250 350 Min. 36 127 ﾷThe * mark indicates the hybrid type (equipped with the X-pump system). ﾷTNS100RE and larger models are made to order.   Performance Specifications: TH-E Series [Center injection/Single-stage type] Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Mold thickness (mm) Tie bar clearance… More Info

HM7 Tabletop Molding Machine

Nissei HM7  (for reference purposes only)   Performance Specifications - Nissei Ultra Compact HM7 Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) Tie bar clearance (mm) HM7 14 6.2 69 [7] 110 110 102 x 102 Features Designed on the basis of an idea that is completely different from the conventional concept of injection molding machines, HM7 with the clamping force of 69 kN is the smallest machine in this class, while fully equipped with necessary functions. The machine that can be installed in any place for a variety of purposes can be used conveniently for small- or large-quantity production, as well as for trial and mass production. More Info

Nissei ST Vertical Machines

Nissei ST Series Small Tonnage Vertical Machines   Performance Specifications - Nissei ST (Small Tonnage Vertical) Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) ST10-2V*1 ST10S2V*2 ST10R2V*3 16 13 98 [10] 170 130 19 18 22 25 ST20-5V*1 ST20S5V*2 ST20R5V*3 22 35 193 [20] 200 150 Features In order to secure the space for automation, the molding machine is made compact to save installation space. The machine that excels in extendibility permits approach to a mold from four (five) directions, flexibly catering to efficient operation of a plant and automation with a variety of systems. Space-saving, compact design with low machine height for the installation area of 750 x 800 mm (ST10) and 900 x 1000 mm (ST20) Complete reduction in piping/wiring Materialization of energy-saving operation Approaching the mold in four (five) directions, the machine permits wide operation space and excellent extendibility for automation. The machine supports in-line operation in… More Info

Nissei TH Vertical Machines

Nissei TH Series Vertical Single Station Machines Performance Specifications: TH Series [Center injection/Single-stage type] Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) Tie bar clearance (mm) TH40-2V 16 13 403 [40] 270 200 360 x 360 19 18 22 25 TH40-5V 22 35 26 49 30 65 TH60-5V 22 35 607 [60] 290 230 410 x 410 26 49 30 65 TH60-9V 28 69 32 90 36 114 TH100-9V 28 69 983 [100] 310 260 460 x 460 32 90 36 114 TH100-12V 32 100 36 127 40 157 * TH Series is made to order. Features The TH Series, in which the clamping cylinder is stored in the machine bed and the injection mechanism is arranged vertically, has been designed rationally to save the installation space and ensure high workability, safety, and cost performance. This is a single-stage type ideal for hoop insert molding. More Info

Nissei TNS Vertical Rotary Machines

Nissei TNS Series Vertical Rotary Machines  Performance Specifications: TNS Series [Center injection/Turntable type] Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) TNS30R2V 16 13 294 [30] 200 150 19 18 22 25 TNS30R5V 22 35 26 49 30 65 TNS50R5V 22 35 532 [54] 250 170 26 49 30 65 TNS50R9V 28 69 32 90 36 114 TNS75R9V 28 69 735 [75] 250 200 32 90 36 114 TNS75R12V 32 100 36 127 40 157 TNS100R12V 32 100 1026 [100] 250 300 36 127 40 157 TNS100R18V 36 147 40 182 45 231 TNS150R18V 36 147 1469 [150] 250 350 40 182 45 231 TNS150R25V 40 201 45 254 50 314 TNS220R25V 40 201 2156 [220] 370 450 45 254 50 314 * In addition to the above, the parting (horizontal) injection type is available. (TNS30R-TNS100R) * TNS100R and larger models are made to order. This vertical machine with better… More Info

Questions and Quote Requests

You can find Quote Request Forms on our Contact Page
Contact Us