Mold clamping force: 30 – 100ton
Swing angle: 50- 90
Adjustable stroke
Adjustable chuck waiting position
Linear guide: Yushin linear rail
Controller: G-type controller
Three-plate molds are supported
Two arms are provided for both the product and the runner sides, allowing small products and runners to be taken out simultaneously.
Multilingual display selection (optional).
This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented the international market.
A vacuum unit can be installed.
A compact vacuum end of arm tool can be installed on the main arm.
Power voltage | AC200V 0.25A (50/60Hz) |
---|---|
Control method | Sequence stored program |
Working Pressure | 0.4 – 0.5MPa |
Maximum allowable pressure | 0.8MPa |
Model | TWINHOP-G450 | TWINHOP-G550 | |
Stroke | Descent (mm) | 450 | 550 |
Kick (mm) | 90 | ||
Swing | Min.50 – Max.90 | ||
Chuck position | Waiting position adjustable range 60mm | ||
Air consumption liter(Normal)/cycle |
16 | 18 | |
Maximum weigh capacity | 2Kg | ||
Robot weight | 47kg | 48kg |