(416) 286-3030 blemieux@en-plasinc.com

Featured

TEST

Used Yushin RC400 (2018)

A rare find...late model used Yushin RCII400S-19-15.5 in excellent condition. Extended vertical arm option for more flexibility outside the press. Used 2017 Yushin Model RC11-400S-19-15.5 Servo Traverse Robot With E-Touch II Controller with 10.4” full colour touch panel SPECIFICATIONS Power source:                                                      AC200 Volts (60 hz) Driving method:                                                  Digital servo motor (3 axis) Control method:                                                  Micro computer controller Operating air pressure:                                         0.49MPa Maximum air pressure:                                        0.79MPa Wrist flip angle:                                                   90 degrees by air Max. electrical consumption:                              3 phase/200V AC/7.6A Traverse stroke:                                                   1900 mm Kick stroke, main arm:                                        978 mm Vertical stroke, main arm:                                   1550 mm Air consumption:                                                 16 (l(normal)/ Cycle) Maximum… More Info
TEST

Used Nissei FV9100 700ton Hydraulic Molding Machine

Used Nissei FV9100/310L 700ton Hydraulic Molding Machine equipped with 9300T 575V/230V - excellent condition (Yr 2003)  29,725hrs Please contact blemieux@en-plasinc.com for more details or a quote. Please refer to link below for specs (FV660) https://www.en-plasinc.com/equipment/nissei/nissei-reference/nissei-fv-large-tonnage-machines/ More Info
TEST

Used Yushin RA400 3 Axis Servo Robot

Used Yushin RA400 3 Axis Servo Robot (suitable for 300tons to 500ton applications) Excellent condition.  specs and more details to be posted shortly. Please contact blemieux@en-plasinc.com for more details. More Info
TEST

Used Nissei FNX280 Hybrid Molding Machine

Used 2014 Nissei FNX280//71A (300ton) Hybrid (Servo-hydraulic) injection molding machine equipped with TACT IV Controller 24,472hrs (230V) Please contact blemieux@en-plasinc.com for more details or quote https://www.en-plasinc.com/wp-content/uploads/fnx280.pdf MODEL FNX280 Specification Item Unit 71A (Standard) 100A Injection Screw diameter Inch (mm) A 2.20 (56) B 2.48 (63) C 2.80 (71) A 2.48 (63) B 2.80 (71) C 3.15 (80) Injection capacity in3 (cm3) (oz) 33.8 (554) (18.6) 42.8 (701) (23.5) 54.4 (891) (29.9) 48.5 (795) (26.6) 61.6 (1010) (33.8) 78.1 (1280) (42.9) Plasticizing capacity [PS] lbs/h (kg/h) 276 (125) 368 (167) 518 (235) 357 (162) 503 (228) 699 (317) Injection pressure psi… More Info
TEST

Used Rapid 1018K Grinder 10HP

Used Rapid 1018K Sound Proofed Grinder 10HP (1998) Has front feed and robot feed options. Please contact blemieux@en-plasinc.com for more details or quote. More Info
TEST

Used Nissei NS60 – Year 2004

Used Nissei NS60-9A (2004) equipped with NC21 controller Nissei NS Hydraulic Series (for reference purposes only) specs highlighted in red below Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) Tie bar clearance (mm) NS20-2A 16 13 189 [19] 220 150 255 x 255 19 18 22 25 NS40-5A 22 35 384 [39] 300 150 310 x 310 26 49 30 65 NS60-9A 28 69 630 [64] 430 170 345 x 345 More Info
TEST

Used Yushin RC1300 Double Vertical Arm Year 2011

Late Model Used 2011 Yushin RC1300D servo robot excellent for large tonnage machine applications. Very Low Hours! RCII-1300DS-35-18-18 Traverse stroke:3500mm Main vertical stroke:1800mm Sub vertical stroke:1800mm Total 2 vacuum circuits and 2 releasing positions on each arm Total 2 product chuck circuits(Single solenoid 6mm, 2line) on each arm Total 1 sprue chuck circuit on each arm EuroMap 12/SPI ,32pin connector High-Speed traverse Ideal for insert molding or stacked molds, but can be utilized for single arm pick and place as well.  Please contact for more details and pricing. More Info
TEST

Used Nissei FN460 500ton Hydraulic Molding Machine

Used Year 2007 Nissei Model FN460-160A Injection Molding machine with 51880 HRS               With TACT controller, 80 mm hardened barrel and screw (2) Hydraulic corepull, (1) Air core pull, Air blow off circuit Non-insulated barrel cover, Cycle counter, Centralized manual lubrication system Screw cold start preventing circuit Hydraulic oil temperature upper and lower limit warnings Water saver valve, Mounting pads *Optional Tecnomagnete Magentic Platens SPECIFICATIONS  CLAMP UNIT Clamp force:                                                        501 U.S. Tons Molding clamp stroke                                          1025 mm (40.35”) Minimum mold thickness                                    375 mm (14.76”) Maximum daylight opening                                1400 mm (55.12”) Clearance between Tie Bars (HxV):                   820 mm x 820 mm (32.28"… More Info