(416) 286-3030 blemieux@en-plasinc.com

New Arrival

TEST

Used Yushin RC400 (2018)

A rare find...late model used Yushin RCII400S-19-15.5 in excellent condition. Extended vertical arm option for more flexibility outside the press. Used 2017 Yushin Model RC11-400S-19-15.5 Servo Traverse Robot With E-Touch II Controller with 10.4” full colour touch panel SPECIFICATIONS Power source:                                                      AC200 Volts (60 hz) Driving method:                                                  Digital servo motor (3 axis) Control method:                                                  Micro computer controller Operating air pressure:                                         0.49MPa Maximum air pressure:                                        0.79MPa Wrist flip angle:                                                   90 degrees by air Max. electrical consumption:                              3 phase/200V AC/7.6A Traverse stroke:                                                   1900 mm Kick stroke, main arm:                                        978 mm Vertical stroke, main arm:                                   1550 mm Air consumption:                                                 16 (l(normal)/ Cycle) Maximum… More Info
TEST

Used Yushin RA400 3 Axis Servo Robot

Used Yushin RA400 3 Axis Servo Robot (suitable for 300tons to 500ton applications) Excellent condition.  specs and more details to be posted shortly. Please contact blemieux@en-plasinc.com for more details. More Info
TEST

Used Rapid 1018K Grinder 10HP

Used Rapid 1018K Sound Proofed Grinder 10HP (1998) Has front feed and robot feed options. Please contact blemieux@en-plasinc.com for more details or quote. More Info
TEST

Used Acetronic Hotrunner system

2 x Used Acetronic Hotrunner System (5 Zones each) Includes power cord and mold connection cables. Please contact blemieux@en-plasinc.com for more details or quote. More Info
TEST

Used DME 8 Zone Hotrunner System

Used DME 8 Zone Hotrunner System...comes with 7 active zones and one spare. Includes power cord and mold connections. Please contact blemieux@en-plasinc.com for more details or a quote.   More Info
TEST

Used Nissei NS60 – Year 2004

Used Nissei NS60-9A (2004) equipped with NC21 controller Nissei NS Hydraulic Series (for reference purposes only) specs highlighted in red below Model Screw diameter (mm) Injection capacity (cm3) Clamping force (kN [tf]) Clamping stroke (mm) Min. mold thickness (mm) Tie bar clearance (mm) NS20-2A 16 13 189 [19] 220 150 255 x 255 19 18 22 25 NS40-5A 22 35 384 [39] 300 150 310 x 310 26 49 30 65 NS60-9A 28 69 630 [64] 430 170 345 x 345 More Info
TEST

Used Flat Conveyor Belt

(4 Available) Lightly Used Model EAF-38-120-40 Extruded Aluminum Flat belt modular conveyor on casters (Approx 1 year old) Anodized Extruded aluminum construction Single V- Guided laced belt (anti-static blue polyurethane, meets FDA/USDA standards) Timing belt drive motor/reducer drive system Anodized aluminum side rails 4” high, 90 degree overlapping the belt 1 ¼” per side Automatic spring load belt tensioning 38” effective belt width between rails 41” overall frame width 52.2” overall conveyor width at motor location 10 ft overall conveyor length Adjustable aluminim leg set Note: Belt height = 38” 4” diameter swivel caster set with toe locks, 400# rating,… More Info
TEST

Used Yushin RC1300 Double Vertical Arm Year 2011

Late Model Used 2011 Yushin RC1300D servo robot excellent for large tonnage machine applications. Very Low Hours! RCII-1300DS-35-18-18 Traverse stroke:3500mm Main vertical stroke:1800mm Sub vertical stroke:1800mm Total 2 vacuum circuits and 2 releasing positions on each arm Total 2 product chuck circuits(Single solenoid 6mm, 2line) on each arm Total 1 sprue chuck circuit on each arm EuroMap 12/SPI ,32pin connector High-Speed traverse Ideal for insert molding or stacked molds, but can be utilized for single arm pick and place as well.  Please contact for more details and pricing. More Info