Nissei TNX Vertical Hybrid Machines (specs can be found at bottom of page)
TNX Series is a turntable type ideal for many types of insert moldings. TNX Series offers five basic types by clamping force, ranging from 532kN (50ton) to 2156kN (220ton). For injection, center-injection type (vertical injection from top of the mold) ﾁTNX-R-Vﾁh or parting-injection type (horizontal injection from side of the mold) TNX-R-Aﾁh can be chosen, offering optimal selections from 19 different configurations (parting injection types are made to order).
The key feature of TNX Seriesﾁh is its innovative super energy-efficient hybrid pump system X-Pump,ﾁh which demonstrates superb injection performance while saving on the running cost.
For 50 ton TNX50R, it consumes 70% less power and 25% less hydraulic oil than those of conventional hydraulic machine. Injection Mechanism(1) Expanding moldable range by securing wide-ranging injection (2) Expanding moldable range by its outstanding stability in ultra-low speed & pressure range (3) Expanding moldable range and improving product quality by its long-sustainable high injection pressure
Clamping Mechanism
|
MODEL
|
TNX50R
|
|
Specification Item
|
Unit
|
|
5V
|
|
|
|
|
|
0.87 (22)
|
1.02 (26)
|
1.18 (30)
|
|
|
|
|
|
2.1 (1.2) (35)
|
3.0 (1.6) (49)
|
4.0 (2.2) (65)
|
|
|
|
|
|
30.9 (14)
|
44.1 (20)
|
66.1 (30)
|
|
|
|
|
|
37120
(256) (2610)
|
26590
(183) (1870)
|
19980
(138) (1405)
|
|
|
|
|
|
7.0 (114)
|
9.7 (159)
|
12.9 (212)
|
|
|
|
|
|
11.8 (300)
|
|
|
|
|
|
0~300
|
|
|
|
|
|
2.0 (1.8)
|
|
|
|
|
|
59 (53)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
6.7 (170)
|
|
|
|
|
|
16.5 (420)
|
|
|
|
|
|
21.7×15.7 (550×400)
|
|
|
|
|
|
9.3×9.3 (235×235)
|
|
|
|
|
|
14.3×14.3 (364×364)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
40.6 (1030)
|
|
|
|
|
|
551×2 (250×2)
(2 mold halves)
|
|
|
|
|
|
11
|
|
|
|
|
|
3.77
|
4.22
|
|
|
|
|
|
40 (150)
|
|
|
|
|
|
105.7×62.8×115.7
(2.68×1.59×2.94)
|
105.7×62.8×117.7
(2.68×1.59×2.99)
|
|
|
|
|
|
100.4×48.8 (2.55×1.24)
|
|
|
|
|
|
8378 (3.8)
|
|
|
9V
|
|
|
|
|
|
1.10 (28)
|
1.26 (32)
|
1.42 (36)
|
|
|
|
|
|
4.2 (2.3) (69)
|
5.5 (3.0) (90)
|
7.0 (3.8) (114)
|
|
|
|
|
|
39.7 (18)
|
59.5 (27)
|
79.4 (36)
|
|
|
|
|
|
35410
(244) (2490)
|
27020
(187) (1900)
|
21330
(147) (1500)
|
|
|
|
|
|
7.5 (123)
|
9.8 (161)
|
12.4 (203)
|
|
|
|
|
|
7.9 (200)
|
|
|
|
|
|
0~200
|
|
|
|
|
|
2.7 (2.4)
|
|
|
|
|
|
59 (53)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
6.7 (170)
|
|
|
|
|
|
16.5 (420)
|
|
|
|
|
|
21.7×15.7 (550×400)
|
|
|
|
|
|
9.3×9.3 (235×235)
|
|
|
|
|
|
14.3×14.3 (364×364)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
40.6 (1030)
|
|
|
|
|
|
551×2 (250×2)
(2 mold halves)
|
|
|
|
|
|
15
|
|
|
|
|
|
6.23
|
|
|
|
|
|
40 (150)
|
|
|
|
|
|
105.7×62.8×133.5
(2.68×1.59×3.39)
|
|
|
|
|
|
100.4×48.8 (2.55×1.24)
|
|
|
|
|
|
8818 (4.0)
|
|
|
Injection
|
Screw diameter
|
Inch (mm)
|
|
Injection capacity
|
in3 (oz) (cm3)
|
|
Plasticizing capacity [PS]
|
lbs/h (kg/h)
|
|
Injection pressure
|
psi
(MPa) (kg/cm2)
|
|
Injection rate
|
in3/s (cm3/s)
|
|
Injection velocity
|
in/s (mm/s)
|
|
Screw rotation speed
|
rpm
|
|
Nozzle touch force
|
US ton (tf)
|
|
Clamping
|
Clamping force
|
US ton (tf)
|
|
Clamping stroke
|
inch (mm)
|
|
Min. mold thickness
|
inch (mm)
|
|
Max. daylight opening
|
inch (mm)
|
|
Die plate dim.[HxV]
|
inch (mm)
|
|
Min. mold dim. [HxV]
|
inch (mm)
|
|
Max. mold dim. [HxV]
|
inch (mm)
|
|
Ejector stroke
|
inch (mm)
|
|
Ejector force
|
US ton (tf)
|
|
Turntable diameter
|
inch (mm)
|
|
Max. mold weight
(bottom mold)
|
lbs (kg)
|
|
Others
|
Pump motor
|
kW
|
|
Heater band capacity
|
kW
|
|
Hydraulic oil qty
|
Gal (L)
|
|
Machine dimensions
[LxWxH]
|
inch (m)
|
|
Floor dimensions [LxW]
|
inch (m)
|
|
Machine weight
|
lbs (t)
|
|
|
œ All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
œ Nissei is not responsible for any inaccuracies contained herein.
œ Please consult our sales representative or Nissei regional offices before designing the mold.
œ Actual placticizing capacity may vary, depending on the molding conditions and material used.
œ For parting injection type (TNX-R-A), contact us for details.
|
|
|
MODEL
|
TNX75R
|
|
Specification Item
|
Unit
|
|
9V
|
|
|
|
|
|
1.10 (28)
|
1.26 (32)
|
1.42 (36)
|
|
|
|
|
|
4.2 (2.3) (69)
|
5.5 (3.0) (90)
|
7.0 (3.8) (114)
|
|
|
|
|
|
39.7 (18)
|
59.5 (27)
|
79.4 (36)
|
|
|
|
|
|
35410
(244) (2490)
|
27020
(187) (1900)
|
21330
(147) (1500)
|
|
|
|
|
|
7.5 (123)
|
9.8 (161)
|
12.4 (203)
|
|
|
|
|
|
7.9 (200)
|
|
|
|
|
|
0~200
|
|
|
|
|
|
2.7 (2.4)
|
|
|
|
|
|
85 (77)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
7.9 (200)
|
|
|
|
|
|
17.7 (450)
|
|
|
|
|
|
23.6×18.1 (600×460)
|
|
|
|
|
|
11.0×11.0 (280×280)
|
|
|
|
|
|
16.7×16.7 (423×423)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
47.6 (1210)
|
|
|
|
|
|
551×2 (250×2)
(2 mold halves)
|
|
|
|
|
|
15
|
|
|
|
|
|
6.23
|
|
|
|
|
|
50 (170)
|
|
|
|
|
|
109.6×66.7×135.2
(2.78×1.69×3.43)
|
|
|
|
|
|
104.3×52.8 (2.65×1.34)
|
|
|
|
|
|
9700 (4.4)
|
|
|
12V
|
|
|
|
|
|
1.26 (32)
|
1.42 (36)
|
1.57 (40)
|
|
|
|
|
|
6.1 (3.4) (100)
|
7.7 (4.3) (127)
|
9.6 (5.3) (157)
|
|
|
|
|
|
50.7 (23)
|
70.5 (32)
|
97.0 (44)
|
|
|
|
|
|
32850
(226) (2310)
|
25950
(179) (1825)
|
21050
(145) (1480)
|
|
|
|
|
|
7.9 (129)
|
9.9 (163)
|
12.3 (201)
|
|
|
|
|
|
6.3 (160)
|
|
|
|
|
|
0~170
|
|
|
|
|
|
2.7 (2.4)
|
|
|
|
|
|
85 (77)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
7.9 (200)
|
|
|
|
|
|
17.7 (450)
|
|
|
|
|
|
23.6×18.1 (600×460)
|
|
|
|
|
|
11.0×11.0 (280×280)
|
|
|
|
|
|
16.7×16.7 (423×423)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
47.6 (1210)
|
|
|
|
|
|
551×2 (250×2)
(2 mold halves)
|
|
|
|
|
|
15
|
|
|
|
|
|
7.43
|
|
|
|
|
|
50 (170)
|
|
|
|
|
|
109.6×66.7×141.1
(2.78×1.69×3.58)
|
|
|
|
|
|
104.3×52.8 (2.65×1.34)
|
|
|
|
|
|
9921 (4.5)
|
|
|
Injection
|
Screw diameter
|
Inch (mm)
|
|
Injection capacity
|
in3 (oz) (cm3)
|
|
Plasticizing capacity [PS]
|
lbs/h (kg/h)
|
|
Injection pressure
|
psi
(MPa) (kg/cm2)
|
|
Injection rate
|
in3/s (cm3/s)
|
|
Injection velocity
|
in/s (mm/s)
|
|
Screw rotation speed
|
rpm
|
|
Nozzle touch force
|
US ton (tf)
|
|
Clamping
|
Clamping force
|
US ton (tf)
|
|
Clamping stroke
|
inch (mm)
|
|
Min. mold thickness
|
inch (mm)
|
|
Max. daylight opening
|
inch (mm)
|
|
Die plate dim.[HxV]
|
inch (mm)
|
|
Min. mold dim. [HxV]
|
inch (mm)
|
|
Max. mold dim. [HxV]
|
inch (mm)
|
|
Ejector stroke
|
inch (mm)
|
|
Ejector force
|
US ton (tf)
|
|
Turntable diameter
|
inch (mm)
|
|
Max. mold weight
(bottom mold)
|
lbs (kg)
|
|
Others
|
Pump motor
|
kW
|
|
Heater band capacity
|
kW
|
|
Hydraulic oil qty
|
Gal (L)
|
|
Machine dimensions
[LxWxH]
|
inch (m)
|
|
Floor dimensions [LxW]
|
inch (m)
|
|
Machine weight
|
lbs (t)
|
|
|
œ All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
œ Nissei is not responsible for any inaccuracies contained herein.
œ Please consult our sales representative or Nissei regional offices before designing the mold.
œ Actual placticizing capacity may vary, depending on the molding conditions and material used.
œ For parting injection type (TNX-R-A), contact us for details.
|
|
|
MODEL
|
TNX100R
|
|
Specification Item
|
Unit
|
|
12V
|
|
|
|
|
|
1.26 (32)
|
1.42 (36)
|
1.57 (40)
|
|
|
|
|
|
6.1 (3.4) (100)
|
7.7 (4.3) (127)
|
9.6 (5.3) (157)
|
|
|
|
|
|
50.7 (23)
|
70.5 (32)
|
97.0 (44)
|
|
|
|
|
|
32850
(226) (2310)
|
25950
(179) (1825)
|
21050
(145) (1480)
|
|
|
|
|
|
7.9 (129)
|
9.9 (163)
|
12.3 (201)
|
|
|
|
|
|
6.3 (160)
|
|
|
|
|
|
0~170
|
|
|
|
|
|
2.7 (2.4)
|
|
|
|
|
|
115 (105)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
11.8 (300)
|
|
|
|
|
|
21.7 (550)
|
|
|
|
|
|
27.6×20.1 (700×510)
|
|
|
|
|
|
12.0×12.0 (305×305)
|
|
|
|
|
|
18.3×18.3 (465×465)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
52.0 (1320)
|
|
|
|
|
|
882×2 (400×2)
(2 mold halves)
|
|
|
|
|
|
15
|
|
|
|
|
|
7.43
|
|
|
|
|
|
53 (200)
|
|
|
|
|
|
115.6×70.3×147.2
(2.93×1.79×3.74)
|
|
|
|
|
|
110.2×56.3 (2.80×1.43)
|
|
|
|
|
|
12125 (5.5)
|
|
|
18V
|
|
|
|
|
|
1.42 (36)
|
1.57 (40)
|
1.77 (45)
|
|
|
|
|
|
9.0 (4.9) (147)
|
11.1 (6.1) (182)
|
14.1 (7.7) (231)
|
|
|
|
|
|
94.8 (43)
|
130 (59)
|
176 (80)
|
|
|
|
|
|
32280
(222) (2270)
|
26170
(180) (1840)
|
20690
(142) (1455)
|
|
|
|
|
|
9.9 (163)
|
12.3 (201)
|
15.5 (254)
|
|
|
|
|
|
6.3 (160)
|
|
|
|
|
|
0~240
|
|
|
|
|
|
3.1 (2.8)
|
|
|
|
|
|
115 (105)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
11.8 (300)
|
|
|
|
|
|
21.7 (550)
|
|
|
|
|
|
27.6×20.1 (700×510)
|
|
|
|
|
|
12.0×12.0 (305×305)
|
|
|
|
|
|
18.3×18.3 (465×465)
|
|
|
|
|
|
2.0 (50)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
52.0 (1320)
|
|
|
|
|
|
882×2 (400×2)
(2 mold halves)
|
|
|
|
|
|
15
|
|
|
|
|
|
8.78
|
|
|
|
|
|
53 (200)
|
|
|
|
|
|
115.6×70.3×156.7
(2.93×1.79×3.98)
|
|
|
|
|
|
110.2×56.3 (2.80×1.43)
|
|
|
|
|
|
12787 (5.8)
|
|
|
Injection
|
Screw diameter
|
Inch (mm)
|
|
Injection capacity
|
in3 (oz) (cm3)
|
|
Plasticizing capacity [PS]
|
lbs/h (kg/h)
|
|
Injection pressure
|
psi
(MPa) (kg/cm2)
|
|
Injection rate
|
in3/s (cm3/s)
|
|
Injection velocity
|
in/s (mm/s)
|
|
Screw rotation speed
|
rpm
|
|
Nozzle touch force
|
US ton (tf)
|
|
Clamping
|
Clamping force
|
US ton (tf)
|
|
Clamping stroke
|
inch (mm)
|
|
Min. mold thickness
|
inch (mm)
|
|
Max. daylight opening
|
inch (mm)
|
|
Die plate dim.[HxV]
|
inch (mm)
|
|
Min. mold dim. [HxV]
|
inch (mm)
|
|
Max. mold dim. [HxV]
|
inch (mm)
|
|
Ejector stroke
|
inch (mm)
|
|
Ejector force
|
US ton (tf)
|
|
Turntable diameter
|
inch (mm)
|
|
Max. mold weight
(bottom mold)
|
lbs (kg)
|
|
Others
|
Pump motor
|
kW
|
|
Heater band capacity
|
kW
|
|
Hydraulic oil qty
|
Gal (L)
|
|
Machine dimensions
[LxWxH]
|
inch (m)
|
|
Floor dimensions [LxW]
|
inch (m)
|
|
Machine weight
|
lbs (t)
|
|
|
œ All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
œ Nissei is not responsible for any inaccuracies contained herein.
œ Please consult our sales representative or Nissei regional offices before designing the mold.
œ Actual placticizing capacity may vary, depending on the molding conditions and material used.
œ For parting injection type (TNX-R-A), contact us for details.
|
|
|
MODEL
|
TNX150R
|
|
Specification Item
|
Unit
|
|
18V
|
|
|
|
|
|
1.42 (36)
|
1.57 (40)
|
1.77 (45)
|
|
|
|
|
|
9.0 (4.9) (147)
|
11.1 (6.1) (182)
|
14.1 (7.7) (231)
|
|
|
|
|
|
94.8 (43)
|
130 (59)
|
176 (80)
|
|
|
|
|
|
32280
(222) (2270)
|
26170
(180) (1840)
|
20690
(142) (1455)
|
|
|
|
|
|
9.9 (163)
|
12.3 (201)
|
15.5 (254)
|
|
|
|
|
|
6.3 (160)
|
|
|
|
|
|
0~240
|
|
|
|
|
|
3.1 (2.8)
|
|
|
|
|
|
165 (150)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
13.8 (350)
|
|
|
|
|
|
23.6 (600)
|
|
|
|
|
|
30.7×23.6 (780×600)
|
|
|
|
|
|
13.4×13.4 (340×340)
|
|
|
|
|
|
19.2×19.2 (488×488)
|
|
|
|
|
|
3.1 (80)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
59.1 (1500)
|
|
|
|
|
|
992×2 (450×2)
(2 mold halves)
|
|
|
|
|
|
20
|
|
|
|
|
|
8.78
|
|
|
|
|
|
63 (240)
|
|
|
|
|
|
129.7×77.0x161.0
(3.29×1.95×4.09)
|
|
|
|
|
|
125.6×63.0 (3.19×1.60)
|
|
|
|
|
|
18739 (8.5)
|
|
|
25V
|
|
|
|
|
|
1.57 (40)
|
1.77 (45)
|
1.97 (50)
|
|
|
|
|
|
12.3 (6.7) (201)
|
15.5 (8.5) (254)
|
19.2 (10.5) (314)
|
|
|
|
|
|
97.0 (44)
|
132 (60)
|
176 (80)
|
|
|
|
|
|
34520
(238) (2430)
|
27270
(188) (1920)
|
22050
(152) (1550)
|
|
|
|
|
|
8.4 (138)
|
10.7 (175)
|
13.2 (216)
|
|
|
|
|
|
4.3 (110)
|
|
|
|
|
|
0~170
|
|
|
|
|
|
3.4 (3.1)
|
|
|
|
|
|
165 (150)
|
|
|
|
|
|
9.8 (250)
|
|
|
|
|
|
13.8 (350)
|
|
|
|
|
|
23.6 (600)
|
|
|
|
|
|
30.7×23.6 (780×600)
|
|
|
|
|
|
13.4×13.4 (340×340)
|
|
|
|
|
|
19.2×19.2 (488×488)
|
|
|
|
|
|
3.1 (80)
|
|
|
|
|
|
2.2 (2.0)
|
|
|
|
|
|
59.1 (1500)
|
|
|
|
|
|
992×2 (450×2)
(2 mold halves)
|
|
|
|
|
|
20
|
|
|
|
|
|
11.3
|
|
|
|
|
|
63 (240)
|
|
|
|
|
|
129.7×77.0x157.1
(3.29×1.95×3.99)
|
|
|
|
|
|
125.6×63.0 (3.19×1.60)
|
|
|
|
|
|
21605 (9.8)
|
|
|
Injection
|
Screw diameter
|
Inch (mm)
|
|
Injection capacity
|
in3 (oz) (cm3)
|
|
Plasticizing capacity [PS]
|
lbs/h (kg/h)
|
|
Injection pressure
|
psi
(MPa) (kg/cm2)
|
|
Injection rate
|
in3/s (cm3/s)
|
|
Injection velocity
|
in/s (mm/s)
|
|
Screw rotation speed
|
rpm
|
|
Nozzle touch force
|
US ton (tf)
|
|
Clamping
|
Clamping force
|
US ton (tf)
|
|
Clamping stroke
|
inch (mm)
|
|
Min. mold thickness
|
inch (mm)
|
|
Max. daylight opening
|
inch (mm)
|
|
Die plate dim.[HxV]
|
inch (mm)
|
|
Min. mold dim. [HxV]
|
inch (mm)
|
|
Max. mold dim. [HxV]
|
inch (mm)
|
|
Ejector stroke
|
inch (mm)
|
|
Ejector force
|
US ton (tf)
|
|
Turntable diameter
|
inch (mm)
|
|
Max. mold weight
(bottom mold)
|
lbs (kg)
|
|
Others
|
Pump motor
|
kW
|
|
Heater band capacity
|
kW
|
|
Hydraulic oil qty
|
Gal (L)
|
|
Machine dimensions
[LxWxH]
|
inch (m)
|
|
Floor dimensions [LxW]
|
inch (m)
|
|
Machine weight
|
lbs (t)
|
|
|
œ All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
œ Nissei is not responsible for any inaccuracies contained herein.
œ Please consult our sales representative or Nissei regional offices before designing the mold.
œ Actual placticizing capacity may vary, depending on the molding conditions and material used.
œ For parting injection type (TNX-R-A), contact us for details.
|
|
|
MODEL
|
TNX220R
|
|
Specification Item
|
Unit
|
|
25V
|
|
|
|
|
|
1.57 (40)
|
1.77 (45)
|
1.97 (50)
|
|
|
|
|
|
12.3 (6.7) (201)
|
15.5 (8.5) (254)
|
19.2 (10.5) (314)
|
|
|
|
|
|
97.0 (44)
|
132 (60)
|
176 (80)
|
|
|
|
|
|
34520
(238) (2430)
|
27270
(188) (1920)
|
22050
(152) (1550)
|
|
|
|
|
|
8.4 (138)
|
10.7 (175)
|
13.2 (216)
|
|
|
|
|
|
4.3 (110)
|
|
|
|
|
|
0~170
|
|
|
|
|
|
3.4 (3.1)
|
|
|
|
|
|
242 (220)
|
|
|
|
|
|
14.6 (370)
|
|
|
|
|
|
13.8 (350)
|
|
|
|
|
|
28.3 (720)
|
|
|
|
|
|
33.5×26.4 (850×670)
|
|
|
|
|
|
15.4×15.4 (390×390)
|
|
|
|
|
|
22.0×22.0 (559×559)
|
|
|
|
|
|
3.1 (80)
|
|
|
|
|
|
3.9 (3.6)
|
|
|
|
|
|
63.0 (1600)
|
|
|
|
|
|
1764×2 (800×2)
(2 mold halves)
|
|
|
|
|
|
20
|
|
|
|
|
|
11.3
|
|
|
|
|
|
132 (500)
|
|
|
|
|
|
141.5×84.8×175.2
(3.59×2.15×4.45)
|
|
|
|
|
|
137.4×77.2 (3.49×1.96)
|
|
|
|
|
|
24251 (11.0)
|
|
|
Injection
|
Screw diameter
|
Inch (mm)
|
|
Injection capacity
|
in3 (oz) (cm3)
|
|
Plasticizing capacity [PS]
|
lbs/h (kg/h)
|
|
Injection pressure
|
psi
(MPa) (kg/cm2)
|
|
Injection rate
|
in3/s (cm3/s)
|
|
Injection velocity
|
in/s (mm/s)
|
|
Screw rotation speed
|
rpm
|
|
Nozzle touch force
|
US ton (tf)
|
|
Clamping
|
Clamping force
|
US ton (tf)
|
|
Clamping stroke
|
inch (mm)
|
|
Min. mold thickness
|
inch (mm)
|
|
Max. daylight opening
|
inch (mm)
|
|
Die plate dim.[HxV]
|
inch (mm)
|
|
Min. mold dim. [HxV]
|
inch (mm)
|
|
Max. mold dim. [HxV]
|
inch (mm)
|
|
Ejector stroke
|
inch (mm)
|
|
Ejector force
|
US ton (tf)
|
|
Turntable diameter
|
inch (mm)
|
|
Max. mold weight
(bottom mold)
|
lbs (kg)
|
|
Others
|
Pump motor
|
kW
|
|
Heater band capacity
|
kW
|
|
Hydraulic oil qty
|
Gal (L)
|
|
Machine dimensions
[LxWxH]
|
inch (m)
|
|
Floor dimensions [LxW]
|
inch (m)
|
|
Machine weight
|
lbs (t)
|
|
|
|
œ All specs and dimensions are subject to change without notice or may differ depending upon export destinations and manufactured year.
œ Nissei is not responsible for any inaccuracies contained herein.
œ Please consult our sales representative or Nissei regional offices before designing the mold.
œ Actual placticizing capacity may vary, depending on the molding conditions and material used.
œ For parting injection type (TNX-R-A), contact us for details.
|
