Nissei PNX Series Hybrid Machines
The PNX Series has been developed by fusing the merits of hydraulic molding machines (durability of direct-pressure clamping, low-maintenance, long life, and low cost) and electric molding machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise). The innovative new pump system, “X-Pump,” achieves energy-saving operation and quick response equivalent to those of electric molding machines
Ultimate energy saving
Almost equivalent to electric molding machine
Silent! (Low noise)
Almost equivalent to electric molding machine
Wide-ranging injection velocity
From 1 mm/s ultra low-velocity to 300 mm/s high velocity
Quick-response injection start-up
Start-up time: 50 ms (Standard mode)
Improved injection pressure holding performance
High injection holding pressure can be maintained for a long time (in comparison with electric type)
Inheritance of the tradition of PN
Direct pressure clamping with a new flat clamp
Uniform transmission of correct clamping force
Nissei PNX 40
| Specification item | 2A | 5A (Standard) | ||||
| Screw diameter (mm) | A 16 |
B 19 |
A 22 |
B 26 |
BB 28 |
|
| Injection capacity (cm3) | 13 | 18 | 35 | 49 | 57 | |
| Plasticization capacity [PS] (kg/h) | 7 | 11 | 16 | 23 | 32 | |
| Injection pressure (MPa [kgf/cm2]) |
274 [2800] |
213 [2175] |
276 [2815] |
209 [2130] |
180 [1840] |
|
| Injection rate (cm3/s) | 110 | 156 | 114 | 159 | 184 | |
| Injection velocity (mm/s) | 500 | 300 | ||||
| Screw rotation speed (rpm) | 0~350 | 0~350 | ||||
| Hopper capacity [Optional] (L) | 15 | 15 | ||||
| Camping force (kN [tf]) | 405 [41] | 405 [41] | ||||
| Clamping stroke (mm) | 300 | 300 | ||||
| Min. mold thinkness (mm) | 170 | 170 | ||||
| Max. daylight opening (mm) | 470 | 470 | ||||
| Tie bar clearance [H x V] (mm) | 310 x 310 | 310 x 310 | ||||
| Die plate dimensions [H x V] (mm) | 450 x 450 | 450 x 450 | ||||
| Min. mold dimensions [H x V] (mm) | 210 x 210 | 210 x 210 | ||||
| Ejector stroke (mm) | 60 | 60 | ||||
| Pump motor (kW) | 7.5 | 7.5 | ||||
| Heater band capacity (kW) | 3.03 | 3.37 | 4.96 | 5.73 | 6.16 | |
| Hydraulic oil capacity (L) | 90 | 90 | ||||
| Machine dimensions [L x W x H] (m) |
2.96 x 0.92 x 1.65 |
3.00 x 0.92 x 1.65 |
3.14 x 0.92 x 1.65 |
3.22 x 0.92 x 1.65 |
3.27 x 0.92 x 1.65 |
|
| Floor dimensions [L x W] (mm) | 2.33 x 0.71 | 2.33 x 0.71 | ||||
| Machine weight (t) | 2.2 | 2.2 | ||||
Nissei PNX 60
| Specification item | 5A (Standard) | |||
| Screw diameter (mm) | A 22 |
B 26 |
BB 28 |
|
| Injection capacity (cm3) | 35 | 49 | 57 | |
| Plasticization capacity [PS] (kg/h) | 16 | 23 | 32 | |
| Injection pressure (MPa [kgf/cm2]) |
276 [2815] |
209 [2130] |
180 [1840] |
|
| Injection rate (cm3/s) | 114 | 159 | 184 | |
| Injection velocity (mm/s) | 300 | |||
| Screw rotation speed (rpm) | 0~350 | |||
| Hopper capacity [Optional] (L) | 15 | |||
| Camping force (kN [tf]) | 641 [65] | |||
| Clamping stroke (mm) | 430 | |||
| Min. mold thinkness (mm) | 170 | |||
| Max. daylight opening (mm) | 600 | |||
| Tie bar clearance [H x V] (mm) | 325 x 325 | |||
| Die plate dimensions [H x V] (mm) | 478 x 478 | |||
| Min. mold dimensions [H x V] (mm) | 235 x 235 | |||
| Ejector stroke (mm) | 70 | |||
| Pump motor (kW) | 7.5 | |||
| Heater band capacity (kW) | 4.96 | 5.73 | 6.16 | |
| Hydraulic oil capacity (L) | 130 | |||
| Machine dimensions [L x W x H] (m) |
3.37 x 0.94 x 1.76 |
3.45 x 0.94 x 1.76 |
3.50 x 0.94 x 1.76 |
|
| Floor dimensions [L x W] (m) | 2.57 x 0.75 | |||
| Machine weight (t) | 2.9 | |||
Features
The PNX Series has been developed by fusing the merits of hydraulic molding machines (durability of direct-pressure clamping, maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise). The innovative new pump system, “X-Pump,” achieves energy-saving operation and quick response equivalent to those of electric molding machines