(416) 286-3030 blemieux@en-plasinc.com

HTF 600 Series Hot Oil Process Control Systems

Mokon’s HTF 600 Series is designed to meet the high temperature demands of controlling process temperatures up to 600°F. These Systems feature the latest control technology, unique design philosophies, and unmatched electrical/safety standards to ensure precise process fluid temperature control.
Offered with a pumping capacity of 20 GPM; single, dual, or triple zone configurations, and varying heating capacities, Mokon can match a system to meet your temperature control processing requirements.

← Back to Hot Oil Circulating Systems

HTF 600

HTF_600_Series_Bulletin

Mokon’s HTF 600 Series heat transfer oil systems are designed to meet the high temperature demands of controlling process temperatures up to 600°F (315°C) with an option to go to 650°F (343°C) . Offered with a pumping capacity of 20 GPM; single, dual, or triple zone configurations; and varying heating capacities, Mokon can match a system to meet your temperature control processing requirements. These systems feature the latest control technology, unique design philosophies, and unmatched electrical/safety standards to ensure precise process fluid temperature control.

Unique Heating Design Maximizes Energy Efficiency

  • Smaller hold-up volume of fluid results in faster heat up and cool down
  • Longer heater and fluid life – unique flow pattern design and low watt density elements

Cool Oil Reservoir Design

  • Separate cool oil reservoir isolates heating loop from cooling loop
  • Continuous flow direct immersion heat exchanger eliminates thermal shock
  • Reduces oxidation rate or breakdown of fluid in cool oil reservoir
  • Only system designed to hold fluid in lower reservoir so fluid does not spill onto floor in event of a leak
hp Flow Rate Connections # of Zones Heating
Capacity
kw per Zone
(total kw)
Reservoir
Tank
Volume
(gallons)
Cabinet
Dimensions
L x W x H
(inches)
Approximate
Shipping
Weight
(lbs)
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
1 12 18 41 x 15 x 50 485
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
1 18 + 24 18 41 x 15 x 61 550
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
1 30 + 36 38 41 x 30 x 51 700
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
1 48 38 41 x 30 x 62 822
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
2 12(24) 38 41 x 30 x 51 875
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
2 18(36) + 24(48) 38 41 x 30 x 62 1000
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
2 30(60) + 36(72) 58 41 x 45 x 62 1300
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
3 12(36) 58 41 x 45 x 51 1261
2 20 GPM
and up to
100 psi
1″ process
3/4″ water
3 18(54) + 24(72) 58 41 x 45 x 62 1400

*Higher KW capacities are available – please consult factory.
HTF 600 Internal View

HTF 600 Flow Schematic

The HTF 600 series features Mokon’s unique heating philosophy and cool oil reservoir design, which gives your process accurate temperature control.

The small heater manifold ensures a small hold-up volume of fluid within the process loop for more efficient heating and faster response for process temperature control. The individual heater orientation and manifold design allow the oil to flow in a serpentine pattern to increase the heat transfer rate and reduce the film temperature of the fluid on the heaters, resulting in longer heater and fluid life.

The “cool oil reservoir,” a Mokon trademark, has been enhanced by the incorporation of a new “continuous flow” heat exchanger immersed within the reservoir.

The fluid is cooled by forcing the released process oil through a “continuous flow” heat exchanger where it is mixed with a continuous flow of cool oil from the reservoir. This new design offers the safest and most efficient means of cooling available without the concern of “thermal shock” common in competitive systems with in-line cooling capabilities.
Eurotherm Controller

Eurotherm 3216 Series
The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.

There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller.

Questions and Quote Requests

You can find Quote Request Forms on our Contact Page
Contact Us