Keeps Production Up and Running
Even a minor circuit leak from stress cracks or bad O-rings can stop operations, but with the Mokon HTF NPS Series positive and negative pressure temperature control system, you can finish the production run without the nuisance of a leak or the costly interruption of a repair.
Versatile
Whether your process requires positive pressure (no leaks present) or negative pressure (to stop a leak), HTF NPS Series provides the most efficient means of temperature control. By incorporationg a venturi jet pump and a uniquely designed reservoir, you are provided with a self-supporting means of accurate temperature control up to 400°F (204°C) in a positive or negative pressure condition.
Easy to Use
Designed to be used in the same manner as our Duratherm NPS water system, the system requires no special piping, hoses or utilities. By simply moving a three-way flow control valve on the back of the cabinet, the system is changed from a positive pressure to a negative pressure system in an instant. The system’s reservoir acts as a fluid supply source and air separation device, making the venting of the system automatic.
Easily removable cabinet panels provide access to internal components, making routine maintenance and adjustments simple and fast.
Hp | Flow Rate & Pressure | Connections | # of Zones | Heating Capacity (kW) |
Reservoir Tank Volume (gallons) |
Cabinet Dimensions L x W x H (inches) |
---|---|---|---|---|---|---|
5 | 10 GPM and up to 60 psi |
3/4″ process oil 1″ cooling water |
1 | 12, 24, 36 | 38 | 41 x 30 x 51 |
5 | 10 GPM and up to 60 psi |
3/4″ process oil 1″ cooling water |
1 | 48 | 38 | 41 x 30 x 62 |
5 | 20 GPM and up to 50 psi |
1″ process oil 1″ cooling water |
1 | 12, 24, 36 | 38 | 41 x 30 x 51 |
5 | 20 GPM and up to 50 psi |
1″ process oil 1″ cooling water |
1 | 48 | 38 | 41 x 30 x 62 |
Higher kW capacities and a variety of voltages are available.