Nissei FNX Series Hybrid Machines
FNX 80
| MODEL | FNX80 | |||||||||
| Specification Item | Unit | 9A (Standard) | 12A | |||||||
| Injection | Screw diameter | Inch (mm) | AA 1.02 (26) |
A 1.10 (28) |
B 1.26 (32) |
C 1.42 (36) |
AA 1.10 (28) |
A 1.26 (32) |
B 1.42 (36) |
C 1.57 (40) |
| Injection capacity | in3 (cm3) (oz) |
3.6 (59) (2.0) |
4.2 (69) (2.3) |
5.5 (90) (3.0) |
7.0 (114) (3.8) |
4.7 (77) (2.6) |
6.2 (101) (3.4) |
7.7 (127) (4.3) |
9.6 (157) (5.3) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 42 (19) | 62 (28) | 88 (40) | 119 (54) | 60 (27) | 84 (38) | 115 (52) | 157 (71) | |
| Injection pressure | psi (MPa) (kg/cm2) |
38400 (265) (2700) |
35410 (244) (2490) |
27020 (186) (1900) |
21330 (147) (1500) |
38400 (265) (2700) |
32850 (226) (2310) |
25950 (179) (1825) |
21050 (145) (1480) |
|
| Injection rate | in3/s (cm3/s) | 9.7 (159) | 11.3 (185) | 14.7 (241) | 18.6 (305) | 9.4 (154) | 12.3 (201) | 15.5 (254) | 19.2 (314) | |
| Injection velocity | in/s (mm/s) | 11.8 (300) | 9.8 (250) | |||||||
| Screw rotation speed | rpm | 0~310 | 0~290 | |||||||
| Nozzle touch force | US ton (tf) | 3.4 (3.1) | 3.4 (3.1) | |||||||
| Clamping | Clamping force | US ton (tf) | 89 (81) | 89 (81) | ||||||
| Clamping stroke | inch (mm) | 18.5 (470) | 18.5 (470) | |||||||
| Min. mold thickness | inch (mm) | 7.9 (200) | 7.9 (200) | |||||||
| Max. daylight opening | inch (mm) | 26.4 (670) | 26.4 (670) | |||||||
| Tie bar clearance (HxV) | inch (mm) | 16.5X16.5 (420X420) | 16.5X16.5 (420X420) | |||||||
| Die plate dim.[HxV] | inch (mm) | 22.8X22.8 (580X580) | 22.8X22.8 (580X580) | |||||||
| Min. mold dim. [HxV] | inch (mm) | 10.6×10.6 (270×270) | 10.6×10.6 (270×270) | |||||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | |||||||
| Ejector force | US ton (tf) | 4.4 (4) | 4.4 (4) | |||||||
| Ejector stroke | inch (mm) | 3.0 (75) | 3.0 (75) | |||||||
| Others | Pump motor | kW | 15 | 15 | ||||||
| Heater band capacity | kW | 7.22 | 8.36 | 9.26 | 7.98 | 9.13 | ||||
| Hydraulic oil qty | Gal (L) | 53 (200) | 53 (200) | |||||||
| Machine dimensions [LxWxH] |
inch (m) |
165.9×43.3×67.9 (4.22×1.10×1.73) |
165.9×43.3×67.9 (4.22×1.10×1.73) |
165.9×43.3×67.9 (4.22×1.10×1.73) |
||||||
| Floor dimensions [LxW] | inch (m) | 152.8×33.1 (3.88×0.84) | 152.8×33.1 (3.88×0.84) | |||||||
| Machine weight | lbs (t) | 8378 (3.8) | 8378 (3.8) | |||||||
FNX 110
| MODEL | FNX110 | |||||||||
| Specification Item | Unit | 12A (Standard) | 18A | |||||||
| Injection | Screw diameter | Inch (mm) | AA 1.10 (28) |
A 1.26 (32) |
B 1.42 (36) |
C 1.57 (40) |
AA 1.26 (32) |
A 1.42 (36) |
B 1.57 (40) |
C 1.77 (45) |
| Injection capacity | in3 (cm3) (oz) |
4.7 (77) (2.6) |
6.2 (101) (3.4) |
7.7 (127) (4.3) |
9.6 (157) (5.3) |
7.1 (117) (3.8) |
9.0 (147) (4.9) |
11.1 (182) (6.1) |
14.1 (231) (7.7) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 60 (27) | 84 (38) | 115 (52) | 157 (71) | 84 (38) | 115 (52) | 157 (71) | 214 (97) | |
| Injection pressure | psi (MPa) (kg/cm2) |
38400 (265) (2700) |
32850 (226) (2310) |
25950 (179) (1825) |
21050 (145) (1480) |
38400 (265) (2700) |
32280 (222) (2270) |
26170 (180) (1840) |
20690 (142) (1455) |
|
| Injection rate | in3/s (cm3/s) | 9.4 (154) | 12.3 (201) | 15.5 (254) | 19.2 (314) | 9.8 (161) | 12.4 (203) | 15.3 (251) | 19.4 (318) | |
| Injection velocity | in/s (mm/s) | 9.8 (250) | 7.9 (200) | |||||||
| Screw rotation speed | rpm | 0~290 | 0~290 | |||||||
| Nozzle touch force | US ton (tf) | 3.4 (3.1) | 3.8 (3.5) | |||||||
| Clamping | Clamping force | US ton (tf) | 123 (112) | 123 (112) | ||||||
| Clamping stroke | inch (mm) | 20.5 (520) | 20.5 (520) | |||||||
| Min. mold thickness | inch (mm) | 7.9 (200) | 7.9 (200) | |||||||
| Max. daylight opening | inch (mm) | 28.3 (720) | 28.3 (720) | |||||||
| Tie bar clearance (HxV) | inch (mm) | 18.1×18.1 (460×460) | 18.1×18.1 (460×460) | |||||||
| Die plate dim.[HxV] | inch (mm) | 25.5×25.5 (647×647) | 25.5×25.5 (647×647) | |||||||
| Min. mold dim. [HxV] | inch (mm) | 11.6×11.6 (295×295) | 11.6×11.6 (295×295) | |||||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | |||||||
| Ejector force | US ton (tf) | 5.4 (4.9) | 5.4 (4.9) | |||||||
| Ejector stroke | inch (mm) | 3.3 (85) | 3.3 (85) | |||||||
| Others | Pump motor | kW | 15 | 15 | ||||||
| Heater band capacity | kW | 7.98 | 9.13 | 8.88 | 10.57 | |||||
| Hydraulic oil qty | Gal (L) | 74 (280) | 74 (280) | |||||||
| Machine dimensions [LxWxH] |
inch (m) |
176.4×45.9×70.3 (4.48×1.17×1.79) |
176.4×45.9×70.3 (4.48×1.17×1.79) |
178.9×45.9×70.3 (4.55×1.17×1.79) |
||||||
| Floor dimensions [LxW] | inch (m) | 160.2×35.4 (4.07×0.9) | 160.2×35.4 (4.07×0.9) | |||||||
| Machine weight | lbs (t) | 9700 (4.4) | 9921 (4.5) | |||||||
FNX 140
| MODEL | FNX140 | ||||||||
| Specification Item | Unit | 25A (Standard) | 36A | ||||||
| Injection | Screw diameter | Inch (mm) | AA 1.42 (36) |
A 1.57 (40) |
B 1.77 (45) |
C 1.97 (50) |
A 1.77 (45) |
B 1.97 (50) |
C 2.20 (56) |
| Injection capacity | in3 (cm3) (oz) |
9.9 (163) (5.5) |
12.3 (201) (6.7) |
15.5 (254) (8.5) |
19.2 (314) (10.5) |
17.5 (286) (9.6) |
21.5 (353) (11.8) |
27.0 (443) (14.8) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 106 (48) | 146 (66) | 198 (90) | 267 (121) | 181 (82) | 243 (110) | 331 (150) | |
| Injection pressure | psi (MPa) (kg/cm2) |
36970 (255) (2600) |
31850 (219) (2240) |
25170 (173) (1770) |
20410 (140) (1435) |
30080 (207) (2115) |
24390 (168) (1715) |
19410 (134) (1365) |
|
| Injection rate | in3/s (cm3/s) | 11.2 (183) | 13.8 (226) | 17.5 (286) | 21.5 (353) | 14.5 (238) | 17.9 (294) | 22.5 (369) | |
| Injection velocity | in/s (mm/s) | 7.1 (180) | 5.9 (150) | ||||||
| Screw rotation speed | rpm | 0~265 | 0~240 | ||||||
| Nozzle touch force | US ton (tf) | 3.8 (3.5) | 3.8 (3.5) | ||||||
| Clamping | Clamping force | US ton (tf) | 154 (140) | 154 (140) | |||||
| Clamping stroke | inch (mm) | 23.6 (600) | 23.6 (600) | ||||||
| Min. mold thickness | inch (mm) | 9.8 (250) | 9.8 (250) | ||||||
| Max. daylight opening | inch (mm) | 33.5 (850) | 33.5 (850) | ||||||
| Tie bar clearance (HxV) | inch (mm) | 20.1×20.1 (510×510) | 20.1×20.1 (510×510) | ||||||
| Die plate dim.[HxV] | inch (mm) | 28.7×28.7 (730×730) | 28.7×28.7 (730×730) | ||||||
| Min. mold dim. [HxV] | inch (mm) | 13.4×13.4 (340×340) | 13.4×13.4 (340×340) | ||||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | ||||||
| Ejector force | US ton (tf) | 5.4 (4.9) | 5.4 (4.9) | ||||||
| Ejector stroke | inch (mm) | 3.5 (90) | 3.5 (90) | ||||||
| Others | Pump motor | kW | 20 | 20 | |||||
| Heater band capacity | kW | 10.54 | 13.01 | 15.53 | |||||
| Hydraulic oil qty | Gal (L) | 95 (360) | 95 (360) | ||||||
| Machine dimensions [LxWxH] |
inch (m) |
199.8×48.8×73.8 (5.08×1.24×1.88) |
201.4×48.8×73.8 (5.12×1.24×1.88) |
211.2×48.8×73.8 (5.37×1.24×1.88) |
|||||
| Floor dimensions [LxW] | inch (m) | 183.1×37.8 (4.65×0.96) | 183.1×37.8 (4.65×0.96) | ||||||
| Machine weight | lbs (t) | 12125 (5.5) | 12346 (5.6) | ||||||
FNX180
| MODEL | FNX180 | ||||||||
| Specification Item | Unit | 25A | 36A (Standard) | ||||||
| Injection | Screw diameter | Inch (mm) | AA 1.42 (36) |
A 1.57 (40) |
B 1.77 (45) |
C 1.97 (50) |
A 1.77 (45) |
B 1.97 (50) |
C 2.20 (56) |
| Injection capacity | in3 (cm3) (oz) |
9.9 (163) (5.5) |
12.3 (201) (6.7) |
15.5 (254) (8.5) |
19.2 (314) (10.5) |
17.5 (286) (9.6) |
21.5 (353) (11.8) |
27.0 (443) (14.8) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 106 (48) | 146 (66) | 198 (90) | 267 (121) | 181 (82) | 243 (110) | 331 (150) | |
| Injection pressure | psi (MPa) (kg/cm2) |
36970 (255) (2600) |
31850 (219) (2240) |
25170 (173) (1770) |
20410 (140) (1435) |
30080 (207) (2115) |
24390 (168) (1715) |
19410 (134) (1365) |
|
| Injection rate | in3/s (cm3/s) | 11.2 (183) | 13.8 (226) | 17.5 (286) | 21.5 (353) | 14.5 (238) | 17.9 (294) | 22.5 (369) | |
| Injection velocity | in/s (mm/s) | 7.1 (180) | 5.9 (150) | ||||||
| Screw rotation speed | rpm | 0~265 | 0~240 | ||||||
| Nozzle touch force | US ton (tf) | 3.8 (3.5) | 3.8 (3.5) | ||||||
| Clamping | Clamping force | US ton (tf) | 197 (179) | 197 (179) | |||||
| Clamping stroke | inch (mm) | 27.6 (700) | 27.6 (700) | ||||||
| Min. mold thickness | inch (mm) | 9.8 (250) | 9.8 (250) | ||||||
| Max. daylight opening | inch (mm) | 37.4 (950) | 37.4 (950) | ||||||
| Tie bar clearance (HxV) | inch (mm) | 22.0×22.0 (560×560) | 22.0×22.0 (560×560) | ||||||
| Die plate dim.[HxV] | inch (mm) | 31.5×31.5 (800×800) | 31.5×31.5 (800×800) | ||||||
| Min. mold dim. [HxV] | inch (mm) | 14.8×14.8 (375×375) | 14.8×14.8 (375×375) | ||||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | ||||||
| Ejector force | US ton (tf) | 7.8 (7) | 7.8 (7) | ||||||
| Ejector stroke | inch (mm) | 4.3 (110) | 4.3 (110) | ||||||
| Others | Pump motor | kW | 20 | 20 | |||||
| Heater band capacity | kW | 10.54 | 13.01 | 15.53 | |||||
| Hydraulic oil qty | Gal (L) | 124 (470) | 124 (470) | ||||||
| Machine dimensions [LxWxH] |
inch (m) |
221.8×53.1×78.7 (5.64×1.35×2.00) |
224.6×53.1×78.7 (5.71×1.35×2.00) |
||||||
| Floor dimensions [LxW] | inch (m) | 203.9×39.8 (5.18×1.01) | 203.9×39.8 (5.18×1.01) | ||||||
| Machine weight | lbs (t) | 15212 (6.9) | 15653 (7.1) | ||||||
FNX 220
| MODEL | FNX220 | |||||||
| Specification Item | Unit | 50A (Standard) | 71A | |||||
| Injection | Screw diameter | Inch (mm) | A 1.97 (50) |
B 2.20 (56) |
C 2.48 (63) |
A 2.20 (56) |
B 2.48 (63) |
C 2.80 (71) |
| Injection capacity | in3 (cm3) (oz) |
24.5 (402) (13.5) |
30.8 (505) (16.9) |
39.0 (639) (21.4) |
33.8 (554) (18.6) |
42.8 (701) (23.5) |
54.4 (891) (29.9) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 223 (101) | 302 (137) | 406 (184) | 276 (125) | 368 (167) | 518 (235) | |
| Injection pressure | psi (MPa) (kg/cm2) |
28730 (198) (2020) |
22900 (158) (1610) |
18130 (125) (1275) |
28510 (196) (2005) |
22540 (155) (1585) |
17780 (122) (1250) |
|
| Injection rate | in3/s (cm3/s) | 16.8 (275) | 21.1 (345) | 26.6 (436) | 16.5 (271) | 20.9 (343) | 26.5 (435) | |
| Injection velocity | in/s (mm/s) | 5.5 (140) | 4.3 (110) | |||||
| Screw rotation speed | rpm | 0~220 | 0~200 | |||||
| Nozzle touch force | US ton (tf) | 5.3 (4.8) | 6.2 (5.6) | |||||
| Clamping | Clamping force | US ton (tf) | 237 (215) | 237 (215) | ||||
| Clamping stroke | inch (mm) | 29.9 (760) | 29.9 (760) | |||||
| Min. mold thickness | inch (mm) | 11.4 (290) | 11.4 (290) | |||||
| Max. daylight opening | inch (mm) | 41.3 (1050) | 41.3 (1050) | |||||
| Tie bar clearance (HxV) | inch (mm) | 24.0×24.0 (610×610) | 24.0×24.0 (610×610) | |||||
| Die plate dim.[HxV] | inch (mm) | 34.3×34.3 (870×870) | 34.3×34.3 (870×870) | |||||
| Min. mold dim. [HxV] | inch (mm) | 16.3×16.3 (415×415) | 16.3×16.3 (415×415) | |||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | |||||
| Ejector force | US ton (tf) | 9.8 (8.9) | 9.8 (8.9) | |||||
| Ejector stroke | inch (mm) | 4.7 (120) | 4.7 (120) | |||||
| Others | Pump motor | kW | 30 | 30 | ||||
| Heater band capacity | kW | 18.19 | 21.98 | |||||
| Hydraulic oil qty | Gal (L) | 164 (620) | 164 (620) | |||||
| Machine dimensions [LxWxH] |
inch (m) |
249.0×56.9×78.7 (6.33×1.45×2.00) |
260.6×56.9×78.7 (6.62×1.45×2.00) |
|||||
| Floor dimensions [LxW] | inch (m) | 231.5×46.5 (5.88×1.18) | 231.5×46.5 (5.88×1.18) | |||||
| Machine weight | lbs (t) | 21164 (9.6) | 22046 (10.0) | |||||
FNX280
| MODEL | FNX280 | |||||||
| Specification Item | Unit | 71A (Standard) | 100A | |||||
| Injection | Screw diameter | Inch (mm) | A 2.20 (56) |
B 2.48 (63) |
C 2.80 (71) |
A 2.48 (63) |
B 2.80 (71) |
C 3.15 (80) |
| Injection capacity | in3 (cm3) (oz) |
33.8 (554) (18.6) |
42.8 (701) (23.5) |
54.4 (891) (29.9) |
48.5 (795) (26.6) |
61.6 (1010) (33.8) |
78.1 (1280) (42.9) |
|
| Plasticizing capacity [PS] | lbs/h (kg/h) | 276 (125) | 368 (167) | 518 (235) | 357 (162) | 503 (228) | 699 (317) | |
| Injection pressure | psi (MPa) (kg/cm2) |
28510 (196) (2005) |
22540 (155) (1585) |
17780 (122) (1250) |
29790 (205) (2095) |
23470 (161) (1650) |
18490 (127) (1300) |
|
| Injection rate | in3/s (cm3/s) | 17.0 (279) | 21.5 (353) | 27.4 (449) | 13.1 (334) | 16.7 (424) | 21.2 (539) | |
| Injection velocity | in/s (mm/s) | 4.3 (110) | 4.3 (110) | |||||
| Screw rotation speed | rpm | 0~200 | 0~190 | |||||
| Nozzle touch force | US ton (tf) | 6.2 (5.6) | 6.2 (5.6) | |||||
| Clamping | Clamping force | US ton (tf) | 309 (280) | 309 (280) | ||||
| Clamping stroke | inch (mm) | 32.7 (830) | 32.7 (830) | |||||
| Min. mold thickness | inch (mm) | 12.6 (320) | 12.6 (320) | |||||
| Max. daylight opening | inch (mm) | 45.3 (1150) | 45.3 (1150) | |||||
| Tie bar clearance (HxV) | inch (mm) | 26.0×26.0 (660×660) | 26.0×26.0 (660×660) | |||||
| Die plate dim.[HxV] | inch (mm) | 37.6×37.6 (955×955) | 37.6×37.6 (955×955) | |||||
| Min. mold dim. [HxV] | inch (mm) | 18.3×18.3 (465×465) | 18.3×18.3 (465×465) | |||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | |||||
| Ejector force | US ton (tf) | 9.8 (8.9) | 9.8 (8.9) | |||||
| Ejector stroke | inch (mm) | 5.1 (130) | 5.1 (130) | |||||
| Others | Pump motor | kW | 15+15 | 15+15 | ||||
| Heater band capacity | kW | 21.98 | 28.19 | |||||
| Hydraulic oil qty | Gal (L) | 214 (810) | 214 (810) | |||||
| Machine dimensions [LxWxH] |
inch (m) |
268.5×60.6×81.1 (6.82×1.54×2.06) |
276.0×60.6×81.1 (7.01×1.54×2.06) |
|||||
| Floor dimensions [LxW] | inch (m) | 243.7×49.2 (6.19x.1.25) | 243.7×49.2 (6.19x.1.25) | |||||
| Machine weight | lbs (t) | 25794 (11.7) | 26676 (12.1) | |||||
FNX360
| MODEL | FNX360 | ||||||||
| Specification Item | Unit | 100A (Standard) | 140A | ||||||
| Injection | Screw diameter | Inch (mm) | A 2.48 (63) |
B 2.80 (71) |
C 3.15 (80) |
A 2.80 (71) |
B 3.15 (80) |
C 3.54 (90) |
|
| Injection capacity | in3 (cm3) (oz) |
48.5 (795) (26.6) |
61.6 (1010) (33.8) |
78.1 (1280) (42.9) |
67.7 (1110) (37.2) |
86.0 (1410) (47.2) |
108.6 (1780) (59.6) |
||
| Plasticizing capacity [PS] | lbs/h (kg/h) | 357 (162) | 503 (228) | 699 (317) | 448 (203) | 626 (284) | 851 (386) | ||
| Injection pressure | psi (MPa) (kg/cm2) |
29790 (205) (2095) |
23470 (161) (1650) |
18490 (127) (1300) |
28440 (195) (2000) |
22400 (154) (1575) |
17710 (122) (1245) |
||
| Injection rate | in3/s (cm3/s) | 16.4 (417) | 20.9 (530) | 26.5 (673) | 26.7 (437) | 33.9 (555) | 42.9 (703) | ||
| Injection velocity | in/s (mm/s) | 5.1 (130) | 4.3 (110) | ||||||
| Screw rotation speed | Constant Variable |
rpm | 0~120 120~190 |
0~120 120~170 |
|||||
| Nozzle touch force | US ton (tf) | 6.2 (5.6) | 6.2 (5.6) | ||||||
| Clamping | Clamping force | US ton (tf) | 398 (361) | 398 (361) | |||||
| Clamping stroke | inch (mm) | 38.2 (970) | 38.2 (970) | ||||||
| Min. mold thickness | inch (mm) | 13.8 (350) | 13.8 (350) | ||||||
| Max. daylight opening | inch (mm) | 52.0 (1320) | 52.0 (1320) | ||||||
| Tie bar clearance (HxV) | inch (mm) | 28.9X28.9 (735X735) | 28.9X28.9 (735X735) | ||||||
| Die plate dim.[HxV] | inch (mm) | 41.5X41.5 (1055X1055) | 41.5X41.5 (1055X1055) | ||||||
| Min. mold dim. [HxV] | inch (mm) | 20.5X20.5 (520X520) | 20.5X20.5 (520X520) | ||||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | 4.0 (101.6) | ||||||
| Ejector force | US ton (tf) | 12.2 (11.1) | 12.2 (11.1) | ||||||
| Ejector stroke | inch (mm) | 5.9 (150) | 5.9 (150) | ||||||
| Others | Pump motor | kW | 20+20 | 20+20 | |||||
| Heater band capacity | kW | 28.38 | 36.22 | ||||||
| Hydraulic oil qty | Gal (L) | 259 (980) | 259 (980) | ||||||
| Machine dimensions [LxWxH] |
inch (m) |
294.9X65.4X91.9 (7.49X1.66X2.34) |
311.4X65.4X91.9 (7.91X1.66X2.34) |
||||||
| Floor dimensions [LxW] | inch (m) | 266.9×53.5 (6.78×1.36) | 273.6×53.5 (6.95×1.36) | ||||||
| Machine weight | lbs (t) | 33290 (15.1) | 34833 (15.8) | ||||||
FNX460
| MODEL | FNX460 | |||||
| Specification Item | Unit | 160A (Standard) | ||||
| Injection | Screw diameter | Inch (mm) | A 2.80 (71) |
B 3.15 (80) |
C 3.54 (90) |
|
| Injection capacity | in3 (cm3) (oz) | 77.5 (1270) (42.6) | 98.2 (1610) (54.0) | 123.9 (2030) (68.0) | ||
| Plasticizing capacity [PS] | lbs/h (kg/h) | 441 (200) | 604 (274) | 838 (380) | ||
| Injection pressure | psi (MPa) (kg/cm2) |
28440 (195) (2000) |
22400 (154) (1575) |
17710 (122) (1245) |
||
| Injection rate | in3/s (cm3/s) | 31.4 (515) | 39.8 (653) | 50.5 (827) | ||
| Injection velocity | in/s (mm/s) | 5.1 (130) | ||||
| Screw rotation speed | Constant Variable |
rpm | 0~126 126~180 |
|||
| Nozzle touch force | US ton (tf) | 6.6 (6.0) | ||||
| Clamping | Clamping force | US ton (tf) | 501 (455) | |||
| Clamping stroke | inch (mm) | 40.4 (1025) | ||||
| Min. mold thickness | inch (mm) | 14.8 (375) | ||||
| Max. daylight opening | inch (mm) | 55.1 (1400) | ||||
| Tie bar clearance (HxV) | inch (mm) | 32.3×32.3 (820×820) | ||||
| Die plate dim.[HxV] | inch (mm) | 46.9×46.9 (1190×1190) | ||||
| Min. mold dim. [HxV] | inch (mm) | 22.6×22.6 (575×575) | ||||
| Locating ring dim. | inch (mm) | 4.0 (101.6) | ||||
| Ejector force | US ton (tf) | 15.1 (13.7) | ||||
| Ejector stroke | inch (mm) | 6.3 (160) | ||||
| Others | Pump motor | kW | 30+30 | |||
| Heater band capacity | kW | 35.62 | ||||
| Hydraulic oil qty | Gal (L) | 359 (1360) | ||||
| Machine dimensions [LxWxH] |
inch (m) |
324.8×74.8×101.6 (8.25×1.90×2.58) |
||||
| Floor dimensions [LxW] | inch (m) | 315.2×58.6 (8.01×1.49) | ||||
| Machine weight | lbs (t) | 44092 (20.0) | ||||
Features
Equipped with the “X-Pump,” an innovative hybrid pump system, the FNX Series has the merits of both electric and hydraulic molding machines. With the energy-saving performance and quick injection starting response equivalent to those of the electric type, the series reduces the running cost and improves the moldability and molding quality.
Fusion of advantages in hydraulic machines (direct-pressure clamping, low-maintenance, long life, and low cost) and electric machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise)
Epochal hybrid pump system “X Pump”
Energy saving
Almost equivalent to that of electric molding machines (A maximum of 55% reduction as compared with conventional hydraulic machines)
Quick response injection
Stability in low-velocity/low-pressure & wide range
Injection velocity: From ultra-low (1 mm/s) to high velocity range
Linearity
Excellent linearity in both injection velocity and injection pressure
Excellent injection holding pressure performance
Capability in sustaining high injection holding pressure longer (as compared with electric types)
Reduction in the amount of hydraulic oil
A maximum of 56% reduction as compared with conventional machines
Long-life & low-maintenance system
Merits of direct pressure mold clamping
- Excellent low-pressure clamping performance
- Constant transmission of specified clamping force
- Clamping force not affected by ambient temperature
Easy operation/easy handling